Aastra Telecom 480I CT manual Voicemail Settings, Parameter

IP Phone Administrator Guide

Operational, Basic, and Advanced Parameters

Appendix A

Voicemail Settings

Parameter –	Configuration Files aastra.cfg, <mac>.cfg
sip lineN vmail
Note: The value of "N" is 1 - 9
for 480i, 480i CT, and 9133i.
The value of "N" is 1 for 9112i.
Description	Use this parameter in the <mac>.cfg file to configure the phone to dial a
	specific number to access an existing voicemail account on a Service
	Provider’s server. The user then follows the voicemail instructions for
	listening to voicemails.
	Note: The phone must have a registered voicemail account from a
	server for this feature to be enabled.
	When no registered voicemail accounts are registered to the phone, the
	display shows "List Empty".
	The phone displays up to 99 voicemails for an account even if the
	number of voicemails exceeds the limit.
	Registered account numbers/URIs that exceed the length of the screen,
	either with or without the voicemail icon and the message count, are
	truncated with an ellipse character at the end of the number/URI string.
Format	Integer
Default Value	Not Applicable
Range	0 to 99
Example	sip line1 vmail: *97
	Note: In the above example, the user would dial *97 to access the
	voicemail account.

A-62 41-001129-00 Rev 09, Release 1.4.1