AT&T 5800 user manual Before YOU Begin, About Handset Registration, About Softkeys

Page 4

5800_CIB_1ATT 8/6/02 10:43 AM Page 1

BEFORE YOU BEGIN

About Handset Registration

You must register this (and any other) handset with the base, following the directions in “REGISTER THE HANDSET.” This handset is compatible with telephone models 5840 and 5830.

The original handset that came with the base is automatically registered as Handset 1.

Additional handsets will be assigned Handset 2, Handset 3, Handset 4, Handset 5, and Handset 6.

Whenever you install a handset battery pack, the handset will display SEARCHING FOR BASE (if it’s registered) or ENTER BASE ID (if it’s not registered).

About Softkeys

The handset softkeys are located below the screen display.

Press the softkey below the operation displayed on

the screen to select that operation. (For example, to enter the menu, press the center softkey).

Press O/Cat any time to return to the previous screen.

k

ip

• Press and hold O/Cto return to the idle

 

o screen.

BEGIN

BEFORE YOU

1

Image 4
Contents Expansion Handset Page Contents Begin Before YOU BeginAbout Handset Registration About SoftkeysCharge the Battery Charge the BatteryRegister the Handset Register the HandsetTo Model 5830 Base Unit To Model 5840 Base UnitBelt Clip InstallationHeadset Battery Life InstallationCharge the Handset Battery Pack Need HELP?