Register the Handset, To Model 5830 Base Unit

5800_CIB_1ATT 8/6/02 10:43 AM Page 3

REGISTER THE HANDSET

To Model 5830 Base Unit

1Make sure to charge the handset battery pack at least 12 hours.

2At the cordless handset, use the softkey to select NEW.

3Enter the 15-digit Base Unit ID Code located on the underside of your Model 5830 base.

4Use the softkey to select OK. The screen displays PLEASE WAIT!!.

5After about 45 seconds, the screen displays FOUND BASE. If the handset displays BASE BUSY TRY LATER, the base is in use.

To Model 5840 Base Unit

1Make sure to charge the handset battery pack at least 12 hours.

2 At the 5840 corded base, press MENU .

3Use or to select DISPLAY BASE-ID.

4 Press OK . The base screen will display the 15-digit Base ID code for about 30 seconds, then return to the idle screen. Write down the Base ID code so you can enter it at the handset in STEP 6 below.

5At the cordless handset, use the softkey to select NEW.

6Enter the 15-digit Base ID code.

7 Use the softkey to select OK . The screen displays PLEASE WAIT!!.

8After about 45 seconds, the screen displays FOUND BASE. If the handset displays BASE BUSY TRY LATER, the base is in use.

REGISTER THE HANDSET

For complete operational instructions, please refer to the manual that came with your 5840 or 5830 telephone.