AT&T 5800 user manual Charge the Battery

Page 5

5800_CIB_1ATT 8/6/02 10:43 AM Page 2

CHARGE THE BATTERY

CHARGE THE BATTERY

1Install the handset battery pack.

Use only the battery supplied with this handset or AT&T Accessory Battery Model 2401, SKU#91077.

When you install the battery pack the first time, the handset will display ENTER BASE ID.

2

a) Remove battery

b) Align the contacts and

compartment cover by

place the battery pack in

pressing on indentation

the battery compartment.

and sliding downward.

 

c) Replace cover by sliding it on its track up over battery case until it snaps firmly into place.

Charge the handset battery.

Place the handset in the remote charging stand. The CHARGING light goes on.

Charge the battery at least 12 hours. After the first charge, the battery typically charges in only eight hours.

2

Image 5
Contents Expansion Handset Page Contents Before YOU Begin BeginAbout Handset Registration About SoftkeysCharge the Battery Charge the BatteryRegister the Handset Register the HandsetTo Model 5830 Base Unit To Model 5840 Base UnitHeadset InstallationBelt Clip Charge the Handset Battery Pack InstallationBattery Life Need HELP?