AT&T TL9178, TL91378, TL91178, TL91278 user manual Manual connection, Turning off the auto connection

Bluetooth

Bluetooth setup

Manual connection

To manually re-connect a paired device, make sure the Bluetooth feature is turned on in your cellular phone, select AT&T DECT 6.0 from the paired device list in your cellular phone. Once the connection is established again, the Bluetooth button on the telephone base will turn back on.

Turning off the auto connection

If you do not want the telephone base to re- connect to a paired device automatically after it is disconnected, you can turn off the auto connection feature manually. In order to turn off the auto connection, you will need to initiate a disconnection from the paired cellular phone; this will transmit a signal to the telephone base and disable the auto connection.

While the cellular phone is connected to the telephone base, find the cellular phone’s Bluetooth device list and select AT&T DECT 6.0 to manually disconnect the device. (If disconnection is not an option on your cellular phone, you may need to disable Bluetooth or unpair the telephone base.) Refer to your cellular phone’s user’s manual for instructions. The telephone base will not search and re-connect to this cellular phone until this feature is activated again.

19