Getting started
Belt clip & optional headset
Installation
Snap the belt clip into the retaining tabs on both sides of the handset as shown in the figure.
Removal
Gently lift either of the belt clip retaining tabs, shown in the figure, outwards to remove the belt clip from the handset.
For handsfree telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best result,
use an AT&T 2.5 mm headset. To purchase a headset, visit our website at www.telephones.att.com or call 1 (800)
222-3111. In Canada, dial 1 (866) 288-4268.
Lift the rubber flap here.
Plug a 2.5 mm headset
into the jack on the side of the handset (beneath
the small rubber flap).
Left side of handset
12