Use the date as a guide for the filter replacement period.
USING THE REMOTE CONTROL
Install the pre-filter
1 Remove the HEPA filter from the polyvinyl bag and install it in the main unit with the display facing up.
Insert so that the tabs on the HEPA filter are facing you.
Proper operation cannot be achieved if installed incorrectly.
2 Remove the stamina-power car- bon from the polyvinyl bag and install it in the main unit.
Make sure the tabs on the HEPA filter remain vis- ible.
2 |
| Tabs HEPA filter | ||
Install the filter |
|
| ||
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 Insert the 4 tabs on the
main unit.
Back of front panel
4 Fill in the usage start date on Replacement label the replacement label affixed on
the back of the front panel and then mount the front panel.
•Operate the remote control facing the main unit (re- ceiver).
•The signal range is about 7m (front).
•Make sure there are no objects blocking the path of the signal.
•A Beep will be heard from the main unit when a signal is received.
NOTE
•Avoid strong impact on the remote control. In addition, do not wet the remote control or place it under direct sunlight or near a stove, etc. Malfunction may occur.
Receiver
Transmitter
