Sharp FU-40SE-K operation manual Safety Precautions

Models: FU-40SE-K

1 16
Download 16 pages 56.12 Kb
Page 4
Image 4
SAFETY PRECAUTIONS

SAFETY PRECAUTIONS

Do not use the unit if the power cord or plug is damaged or the connection to the wall outlet is loose.

Electrical shock, short circuit and/or fire may occur as a result.

Do not damage, break, coat, forcefully bend, pull, twist, bundle, pinch or place heavy objects on the power cord.

If the power cord is damaged, fire and/or electrical shock may occur as a result.

Use AC 220~240V only.

Do not modify. Repair and disassembly of this product are to be performed by authorized service personnel only.

Fire, electrical shock and/or bodily injury may occur if not.

For repair, contact your dealer or the nearest Sharp Service Center.

Periodically remove dust from the power plug

Accumulated dust on the power plug may cause bad insulation from humidity, etc. Fire and/or electrical shock may occur as a result.

When cleaning the unit, be sure to remove the power plug from the wall outlet. In addition, never handle the power plug with wet hands.

Electrical shock and/or bodily injury may occur as a result.

Do not use the unit where there are oil ingredients such as cooking oil, etc., in the air. Cracking of the unit surface may occur as a result.

Do not wipe the unit with benzene or paint thinner. Also, do not spray insecticides on the unit.

Cracking, electrical shock and/or fire may occur as a result.

Do not operate the unit when using indoor smoke-generating insecticides.

Chemical ingredients may accumulate within the unit and then discharge from the exhaust port when the unit operates. Discharge of such chemicals may be unhealthy to your body.

Do not allow the unit to intake flammable gases, sparks from lit cigarettes, incense, etc. The unit may ignite as a result.

Do not use the unit where it is humid, such as in a bathroom, etc., or where the unit may get wet.

Electrical shock and/or malfunction may occur as a result.

Do not insert fingers or foreign objects into the intake or exhaust ports. Electrical shock and/or malfunction may occur as a result.

When mounting to a wall, select a sturdy wall or studding. The unit may fall if not.

When removing the power plug, always hold the plug and never pull the cord. Electrical shock and/or fire from short circuit may occur as a result.

Ventilate when using the unit along with a heating appliance. Carbon monoxide poisoning may occur as a result.

Remove the power plug when not using the unit.

If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similarly qualified person in order to avoid a hazard.

The batteries must be disposed of safely.

E-2

Page 4
Image 4
Sharp FU-40SE-K operation manual Safety Precautions