PREPARATION
Be sure to remove the power plug from the wall outlet.
INSTALLING THE FILTERS
To maintain the quality of the filters, they are installed in the main unit within polyvinyl bags. Be sure to remove the filters from the polyvinyl bags before using the unit.
1 Remove the filters
1 Place the unit facing up
Place the unit on a table, etc., so that the stand does not touch the surface.
2 Remove the front panel
Press in the hook on the bottom of the front panel and lift to remove.
2
1 Hook
Place so stand does not touch the surface
Soft cloth
Table, etc. | 1 | |
|
| |
Front panel | 2 |
|
|
| |
| 1 |
|
Prefilter |
|
|
3 Remove the
INSERTING BATTERIES IN THE REMOTE CONTROL
1 Remove the back cover
Press and slide the back cover to re- move.
2 Insert batteries Insert batteries with 
and 
as shown
below.
3 Closecover the back
About the batteries
•The battery life is about 1 year.
Replace the batteries when the remote con- trol becomes inoperative.
•Incorrect usage of the batteries may cause battery fluid leakage and/or damage. Take caution of the following when handling:
•When replacing the batteries, replace both batteries with new ones of the same type. (Use AA alkaline batteries (2 units) or AA manganese batteries (2 units).)
•When not using the unit or remote con- trol for an extensive period, remove the batteries.This prevents malfunction of the remote control from battery fluid leakage.
