AT&T SL82558 Belt clip & optional headset, To attach the belt clip, To remove the belt clip

Getting started

Belt clip & optional headset

To attach the belt clip:

Snap the belt clip into the retaining tabs on both sides of the handset as shown in the figure.

To remove the belt clip:

Gently lift either of the belt clip retaining tabs, shown in the figure, outwards to remove the belt clip from the handset.

For handsfree telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results, use an AT&T 2.5 mm headset. To purchase a headset, visit our website at

www.telephones.att.com or call 1 (800) 222-3111. In Canada dial

1 (866) 288-4268.

Lift the rubber flap here.

Plug a 2.5 mm headset into the jack on the side of handset (beneath the small rubber flap).

Side of handset