AT&T SL82558 user manual Message counter displays

Answering system

Message counter displays

The message counter usually displays the total number of messages. See the table below for other message counter displays.

Message counter displays

0	No messages.
0 (flashing)	The clock needs to be set (pages 42-43).
1-99	Total number of messages and memos, or
	message number currently playing.
1-99(flashing)	Total number of messages and memos.
	The number flashes when there are new
	(un-reviewed) messages.
	After a power failure, the number in the
	message counter will flash to indicate the
	clock needs to be set.
10-99	Current remote access code while setting
	(page 49).
1-99(counting)	Elapsed time while recording a memo
	(page 52) or announcement up to 90
	seconds (page 45).
99 (flashing)	A memo recording is longer than 99
	seconds.
F (flashing)	Memory is full. Messages must be deleted
	before new messages can be recorded.
--	The system is answering a call, being
	accessed remotely, or the clock is being
	set.
-- (flashing)	The system is being setup, initialized or
	messages are being deleted.
02, 04, 06,	Displayed while setting the number of
tS	rings (page 48).
1-8	Displayed for two seconds while adjusting
	the telephone base speaker volume.
HI, LO, OF	Displayed for two seconds while adjusting
	the telephone base ringer volume.

53