AT&T 7700 L E P H O N E M E M O R Y, Storing a Pause in a Memory Dial Number, Priority Ring

Storing a Pause in a Memory Dial Number

When storing a number in memory, press and hold down the number button that comes before the pause, until you hear the second beep. This inserts a 2-second pause after that digit. If you hold the number button down longer, you will hear more beeps as additional pauses are stored.

NOTE: Each pause you store is counted as a digit. You can store up to 24 digits in each memory location.

For example, to store 9, PAUSE, 555-1212 in memory location

9:Press p, 9(hold the 9for 2 seconds until a second beep is heard), then press 5, 5, 5, 1, 2, 1, 2, p, 0, 9.

Reviewing Memory Numbers

1Press p.

2Press m.

3Press +or -to scroll through memory locations and view numbers (press >to view a name after a displayed number, if stored)

— OR —

Enter a location number (01-20) to review.

Priority Ring

If you’ve stored a number in memory and marked it as a VIP caller, when a call comes in from that number, the phone rings in a special way to alert you to this special call. Follow the direc- tions below to mark a memory location as a VIP caller.

1Press p.

2Press m.

3Press +or -to scroll through locations

— OR —

Enter the memory location number (01 - 20).

4Press m. The screen displays the VIP icon. (To remove VIP status, press magain.)

5Press pto store VIP status.

Deleting Memory Numbers and Names

You can delete the information in a single memory location or in all memory locations.

1Press p.

2Press m.

3Press +or -to scroll to the desired memory location.

4Press L. The screen displays CLEAR?

5Press Lto delete the memory information.

To delete all memory location information.

1Press p.

2Press m.

3Press +or -to scroll to TOP OF LIST, then follow Steps 4 and 5 above.