RINGER: 1
DATE/TIME
10:08 02/14
Telephone operation
Settings
Each cordless handset operates individually from the other handsets. The ringer sound, ringer volume, date & time, dial mode and language must be programmed separately for each cord- less handset. Follow the steps below to program the cordless handset. To stop at any time, press
OFF/CLEAR.
Choose cordless handset ringer sound
1.Press MENU/SEL to begin programming.
2.Press 
CID or DIR 
until the screen displays RINGER: and the current setting.
3.Press MENU/SEL to change the current setting.
4.Press 
CID or DIR 
to display 1, 2, 3, 4 or OFF. You will hear a sample of each ringer sound.
5.Press MENU/SEL to choose displayed ringer sound and exit.
NOTE: If you choose OFF, the cordless handset ringer will be turned off, and the screen will display RINGER OFF and 
when the cordless handset is idle (not in use). If there are any 
.
NOTES:
1.You can choose to set the time manually, or you can allow it to be set automati- cally with incoming caller ID information. The time will be set automatically only if you subscribe to caller ID service provided by your local tele- phone company (page 29).
2.Caller ID will not set the year.
Set cordless handset display date and time
1.Press MENU/SEL to begin programming.
2.Press 
CID or DIR 
until the screen displays DATE/TIME.
3.Press MENU/SEL to view or set date and time.
4.Press 
CID or DIR 
to change the month in the date and time line at the bottom of the display, then press MENU/SEL.
5.Repeat step four to set day, hour, minute, and AM/PM.
6.Press MENU/SEL to save selection and exit.
12