AT&T 9341 user manual Batteries, Charging the Handset Battery Pack

Page 23

9341_book_1ATT 6/14/00 4:07 PM Page 21

BATTERIES

Charging the Handset Battery Pack

This battery should remain charged up to six days with the ringer turned on and up to 12 days with the ringer off. A fully charged battery provides an average talk time of about five hours.

The battery pack needs charging when:

A new battery is installed in the handset.

The phone beeps twice every 16 seconds.

The screen displays LOW BATTERY and the low battery icon.

Place the handset in the base so the CHARGING light turns on. The battery pack is typically fully charged in eight hours.

You can keep the battery fully charged by returning the handset to the base after each use.

If you repeatedly get a low battery indicator, even after eight hours of charging, the battery should be replaced.

CAUTION: To reduce the risk of fire or injury to persons or damage to the telephone, read and follow these instructions carefully:

Use only Replacement Battery 3301 (SKU# 91076).

Do not dispose of the battery in a fire. The cell might explode. Check with local codes for special disposal instructions.

Do not open or mutilate the battery. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.

Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause harm.

Charge the battery provided with or identified for use with this product only in accordance with the instructions and limitations specified in this manual.

Observe proper polarity orientation between the battery and battery charger.

21

Image 23
Contents MHz Cordless Telephone With Caller ID/Call Waiting Advanced American Telephones. All rights reserved Contents 9341book1ATT 6/14/00 407 PM About Caller Identification Caller ID Before YOU BeginBefore You Install InstallationTable/Desk Installation Check for dial tone Wall InstallationFollow Steps 3-5 in Table/Desk Installation Auto Answer On/Off Feature SettingsTime/Date Ringer SelectionTelephone Operation Handset Locator Headset Jack Temporary Tone DialingDisplay Screen Messages Operating RangeStore Memory Numbers Telephone MemoryDelete a Specific Number Edit Numbers Stored in MemoryDelete Numbers Stored in Memory Move Numbers Stored in MemoryDial Memory Numbers Review Call History Caller ID OperationAbout Call History Delete All Calls Delete Call HistoryDial a Displayed Number Delete a Specific CallTo LOCATION? Store Call in MemoryTurn Off Call Block Call BlockPrivate Name Batteries Charging the Handset Battery PackReplacing the Handset Battery Pack If the phone doesn’t work at all, check these items first If the phone does not ring when you receive a callCase of Difficulty If you lose a call after changing channels If you hear noise or interference when using the phoneIf you hear other calls while using your phone