Getting started
Installation options
3. To attach the bracket for wall mounting, insert the tabs of the bracket into slots 
and 
on the telephone base, then press the other bracket tabs into slots 
and 
as shown on the right.
4. Plug the power adapter into an electrical outlet |
|
not controlled by a wall switch. Plug the telephone |
|
line cord into a telephone wall jack. To mount the |
|
telephone on the wall, position the mounting holes |
|
and over the telephone outlet mounting studs. |
|
Press and slide the bracket down firmly so the |
|
telephone is held securely on the telephone outlet |
|
mounting studs. | Telephone outlet mounting studs |
Tabletop mounting
To return the bracket from the wall mount to tabletop position, follow the directions below.
1. Remove the telephone base from the wall. Unplug | 2. Insert the bracket tabs into slots | |
the cords from the wall jacks. Remove the bracket | and | on the telephone base, then |
from the telephone base. | press the other bracket tabs into | |
| slots | and . |
3. Route cords through slots. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.
9