AT&T E5815 user manual Incomplete

Page 33

91-000091-020-000.E5815.RO.qxd 2/13/1950 7:21 PM Page 31

Appendix

In case of difficulty

Incomplete

• If a caller leaves a very long message, part of it may be lost when the

messages

system disconnects the call after 4 minutes.

 

• If the caller pauses for more than 7 seconds, the system stops

 

recording and disconnects the call.

 

• If the system’s memory becomes full during a message, the system

 

stops recording and disconnects the call.

 

 

Difficulty hear-

• Press ^on the base to increase speaker volume.

ing messages

 

System does not answer after correct number of rings

•Make sure that the answering system is on.

•If Toll Saver is activated, the number of rings changes to 2 when you have new messages waiting (see page 24).

•In some cases, the system may be affected by the ringing system used by the local telephone company.

•If the memory is full or the system is off, the system will answer after 10 rings.

“CL” flashes in

• You need to reset the answering system clock (see page 21).

message window

 

System does not respond to remote commands

•Make sure to enter your Remote Access Code correctly (see page 28).

•Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot activate the answering system.

•The answering system may not detect the Remote Access Code while your announcement is playing. Try waiting until the announce- ment is over before entering the code.

•There may be noise or interference on the phone line you are using. Press dial-pad buttons firmly.

Announcement message is not clear

•When you record your announcement, make sure you speak in a normal tone of voice, about 9 inches from the base.

•Make sure there is no “background” noise (TV, music, etc.) while you are recording.

31

Page 32 Page 34
Image 33
Page 32 Page 34
Contents GHz Cordless Telephone/Answering System E5815 See Table of contents Handset Quick reference guideTelephone Base Parts checklist Before you begin About Caller IdentificationTelephone operating range Telephone base installation Low battery indicator Battery installation & chargingStep Wall mountingBelt clip & optional headset Install belt clip as shown below if desiredElapsed time Options while on calls Ringer volume Handset settingsRinger tone Key toneHandset name LanguageDial Type Memory capacity Timeouts and error messagesTo create a new phonebook entry New phonebook entriesTo enter a name Storing the entryTo browse through the directory Phonebook searchTo search by name To call a displayed numberTo dial a number To dial, change or delete entriesTo delete an entry To change a listingAbout names How Caller ID worksTo review your call log To review your call logTo return a call ExampleMessage counter Message capacityDay and time announcements To set day and timeTo check day and time Outgoing announcements To record your outgoing announcementTo delete your outgoing announcement To turn Announce Only on or off Announce Only modeFeature options Changing feature optionsAnnouncements Message playbackOptions during playback To delete all messagesRecording and playing memos To record a memoTo play back a memo Message window displays Message window displaysDial your telephone number from any touch-tone phone Remote accessIndicator lights Screen icons, indicator lights & tonesHandset screen icons & alert tones Screen icons Alert tonesTelephone does not work at all Case of difficultyIncomplete Gfsk Technical specificationsIndex 91-000091-020-000.E5815.RO.qxd 2/13/1950 721 PM
Top Page Image Contents