Getting started
Telephone base installation
1.Plug the small end of the larger power adapter into the power jack at the bottom of the tele- phone base.
ƪ Ɛ
see number four in the note section, below.)
Telephone line cord
5.Plug the other end of the telephone line cord into a telephone jack.
NOTES:
2.Plug one end of the telephone line cord into the telephone jack at the bottom of the telephone base.
3.
slots.
4.Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.
1. Use only the power adapter supplied with this product or equivalent. To order a replace-
ment power adapter, visit our website at www.telephones.att.com or call 1 (800)
2.Be sure to use an electrical outlet not controlled by a wall switch.
3.This power adapter is intended to be correctly oriented in a vertical or floor mount position.
ǐƓ ƪƫƐ Ƥ Ɛ ƓƓ
6