AT&T 8243 user manual Temporary Tone Dialing, Headset Jack

Page 12

TELEPHONE OPERATION

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse to touch tone dialing during a call by pressing *. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press *. Buttons pressed after this send touch tone signals.

3After you hang up, the phone automatically returns to dial pulse (rotary) service.

Headset Jack

You can use this telephone hands-free when you install a 2.5 mm headset (SKU 24099), purchased separately.

Plug the headset into the jack located on the right side of the handset (under the small rubber flap). Do not force the connection, but make sure the plug fits securely.

11

Image 12

Contents MHz Cordless Telephone Advanced American Telephones. All rights reserved Contents Before YOU Begin About Caller Identification Caller IDInstallation Before You InstallTable/Desk Installation Wall Installation Check for dial toneFollow Steps 3-5 in Table/Desk Installation Feature Settings Time/DateRinger Selection Auto Answer On/OffHandset Volume Answer a CallMake a Call Flash Call WaitingTelephone Operation Handset LocatorTemporary Tone Dialing Headset JackOperating Range Display Screen MessagesTelephone Memory Store Memory NumbersEdit Numbers Stored in Memory Delete Numbers Stored in MemoryMove Numbers Stored in Memory Delete a Specific NumberDial Memory Numbers Caller ID Operation About Call HistoryReview Call History Delete Call History Dial a Displayed NumberDelete a Specific Call Delete All CallsStore Call in Memory To LOCATION?Call Block Turn Off Call BlockPrivate Name Charging the Handset Battery Pack BatteriesReplacing the Handset Battery Pack If the phone does not ring when you receive a call Case of DifficultyIf the phone doesn’t work at all, check these items first If you hear noise or interference when using the phone If you hear other calls while using your phoneIf you lose a call after changing channels