AT&T E2812B user manual Tabletop mounting

Page 12

Getting started

Installation options


3. To attach the bracket for wall mounting,
insert the tabs of the bracket into slots
and	on the telephone base, then press
the other bracket tabs into slots		and	as
shown on the right.
4. Plug the power adapter into an electrical
outlet not controlled by a wall switch. Plug
the telephone line cord into a telephone wall
jack. To mount the telephone on the wall,
position the mounting holes		and	over
the telephone outlet mounting studs. Press
and slide the bracket down firmly so the				Telephone outlet mounting studs
telephone is held securely on the telephone
outlet mounting studs.

Tabletop mounting

To return the bracket from the wall mount to tabletop position, follow the directions below.

1. Remove the telephone base from the wall. 2. Insert the bracket tabs into slots

Unplug the cords from the wall jacks.

and on the telephone base,

Remove the bracket from the telephone

then press the other bracket

base.

tabs into slots and .

3. Route cords through slots. Plug the other end of the telephone line cord into a telephone wall jack. Plug the large end of the larger power adapter into an electrical outlet not controlled by a wall switch.

Image 12

Contents E2812B On purchasing your new AT&T product Canada dial 1 866Stop Table of contents E2812BQuick reference guide Cordless handsetTelephone base Parts checklist Telephone base installation Avoid placing the telephone base too close to Telephone base installation Battery installation & charging Low battery indicatorInstallation options Wall mountingTabletop mounting Install belt clip as shown optional Belt clip & optional headsetBasic operation Making and answering callsHands-free speakerphone calls Last number redial Temporary ring silencingHandset locator Volume control Options while on callsCall waiting MuteMultiple handset use Intercom Handling incoming callsIntercom call transfer Handset settings Ringer volumeRinger tone Key toneOn or OFF Language ENGLISH, Francais or EspanolClear voice mail indication Dial type Directory Shared directoryMemory capacity Exiting the directoryNew directory entries To create and store a new directory entryPress MENU/SELECT Pat Williams 555-1234 Directory search To browse through the directoryTo search by name To dial, delete or change entries To dial a displayed numberTo delete an entry To change an entryCaller ID operation Information about caller ID with call waitingShared caller ID log Memory match Missed callsTo review the call log To review the call logTo return a call Other options while reviewing the call log Answering system operation Message capacityVoice prompts Day & time announcements To set day and timeTo check day and time Outgoing announcements To play your outgoing announcementTo record your outgoing announcement To delete your outgoing announcementChanging feature options Feature descriptionMessage playback Announcements during message playbackOptions during playback To delete all messagesRecording & playing memos To record a memoTo play back a memo Message counter displays Message counter displaysAnswering system mode To turn the answering system offTo turn the answering system on Call screeningRemote access StopScreen icons, indicator lights & tones Indicator lightsScreen icons & alert tones Handset alert tonesHandset display screen messages Screen display messagesIntercom Ended Troubleshooting LOW Battery Metallic charging contacts CONNECTING… Connecting Troubleshooting Disconnect the telephone base from the modular jack Take place Announce Important safety instructions Especially about cordless telephones Precautions for users of implanted cardiac pacemakers Pacemaker patientsEspecially about telephones answering systems FCC Part 68 & Acta FCC Part 68 & Acta FCC Part Limited warranty Limited warranty Limited warranty Technical specifications Telephone operating rangeIndex Index Remote access wallet card Action Remote command