AT&T E2812B user manual Remote access, Stop

1. Dial your telephone number from any touch- tone telephone.

2. When system answers, enter two digit remote access code (19­ unless you have changed it).

3. Enter remote commands (see list at right).

4. Hang up to end call and save all undeleted mes- sages.

NOTES:

•If there are many old mes- sages in the mailbox, press- ing 3 twice to delete all old messages may take up to 20 seconds. You will hear one beep every one sec- ond to alert you that the answering system is delet- ing the messages. During deletion, if the remote caller hangs up to end the remote access call, the answering system will stop deleting messages. In this case, only some of the old messages may be deleted.

•If you pause for more than four seconds during remote access, you will hear a help menu listing all features and commands. If there is no command entered for another 20 seconds, the call will end automatically.

Answering system operation

Remote access

A two digit security code is required to access your answering system from any touch-tone telephone. This code is 19­ by default, see Changing feature options (page 36) to change it.

Play all messages	Press to hear all messages.
1
Play new messages	Press to hear new messages.
2
Delete message(s)	Press once during playback to
3	delete current message. Press
33	twice to delete all old messages.
Repeat or go back	Press during the caller’s message
	to repeat the message. Press dur-
4
	ing the beginning of the day and
	time announcement to go back to
	the previous message.
Stop	Press to stop any operation (stop
5	playback, stop recording).
Skip to next message	Press to skip current message
6	and advance to next message.
Record announcement	Press * 7, wait for beep, then
*7 to begin recording	begin speaking. Press 5 to stop
	recording and hear playback of
5 to stop recording
	new announcement.
Help menu	Press to hear list of features &
*5	commands.
Turn system off	Press to turn off answering
0	system. Incoming calls will no
	longer be answered.
Turn system on	If off, system will answer after
	10 rings. Enter your access code,
0
	then press 0 to turn the answer-
	ing system on.
Exit	Press 8 or hang up to end the
	remote access call.
8

41