Answering System Operation
1
TIME SET
“Friday, 10:07 am, 2003”
“To change clock, press Time Set”
2
TIME SET
“Friday”
3
CHANGE
“Monday”
Press until correct day is spoken.
4
TIME SET
“10 am”
5
CHANGE
“2 pm”
Press until correct hour is spoken.
6
TIME SET
“07”
7
CHANGE
“26”
Press until correct minute is spoken.
Day and time announcements
To set day and time
Before playing each message, the answering system announces the day and time the message was received.
Before using the answering system, you should follow the steps at left to set the day and time, so messages are dated correctly.
The system uses voice prompts to guide you. Each time you press CHANGE, the day, hour, minute or year advances by one. When you hear the correct setting, press TIME SET to move to the next setting.
To check day and time
You can press TIME SET at any time to hear the current day and time without changing it.
NOTE: Press and hold CHANGE to advance the minute or year by 10 (the year can be set from 2000 to 2039).
NOTE: After you set the time once, it will thereafter be set automatically with incoming Caller ID information. The time will be set automatically only if you subscribe to Caller ID service provided by your local telephone company (see page 5).
8
TIME SET
“2003”
9
@CHANGE
“2004”
Press until correct year is spoken.
10 
@TIME SET
“Monday, 2:26 pm, 2004”
21