![](/images/new-backgrounds/1251460/25146059x1.webp)
1 Dial your telephone number from any touch-tone phone.
2 When system answers, enter 2- digit Remote Access Code (“19” unless you have changed it).
3 Enter remote commands (see list at right).
4 Hang up to end call and save all undeleted messages.
NOTE: If you pause for more than 10 seconds during remote access, you will hear a help menu listing all features & commands. If you issue no command for another 20 seconds, the call will end automatically.
Answering System Operation
Remote access
A
Play messages | Press to hear new messages (if none are |
#2 | new, all play back). |
|
|
Repeat or go back | Press to repeat current message. Press |
#4 | twice (# 4 # 4) to hear previous message. |
|
|
Skip to next message | Press to skip current message and |
#6 | advance to next message. |
|
|
Stop | Press to stop any operation |
#5 | (stop playback, stop recording). |
|
|
Delete message | Press during playback to delete current |
#9 | message. |
|
|
Review announcement | Press to review current outgoing |
#7 | announcement. |
|
|
Record announcement | Press * 7, wait for beep, then begin |
*7to begin recording | speaking. Press # 5 to stop recording and |
#5to stop recording | hear playback of new announcement. |
|
|
Record memo | Press * 8, wait for beep, then begin |
*8to begin recording | speaking. Press # 5 to stop recording. |
#5to stop recording |
|
|
|
Turn system off | Press to turn off answering system. |
#0 | Incoming calls will no longer be answered. |
|
|
Turn system on | If off, system will answer after 10 rings. Enter |
#0 | your access code, then press # 0 to turn on. |
|
|
Help Menu | Press to hear list of features & commands. |
#1 |
|
|
|
Exit | End remote access call (or hang up). |
*0 |
|
28