AT&T 1450 user manual Handset Ringer Style/Battery Save, Temporary Tone Dialing, Headset Jack

Page 10

1450_book_1ATT 3/26 3/26/02 4:59 PM Page 7

TELEPHONE OPERATION

AT THE HANDSET

Handset Ringer Style/Battery Save

You can select from four different handset ringer styles, or turn the ringer off and extend the battery life.

1Make sure the handset is off.

2Press G to enter programming mode.

3Press > until the screen displays RINGER:1 (the number is the current setting).

4Press S. The screen displays the current setting.

5Press < or > to select 1, 2, 3, 4, or OFF. You will hear a sample of each ring.

6Press S to choose the displayed ringer setting.

Temporary Tone Dialing

If you have dial pulse (rotary) service, you can change from dial pulse

to touch tone dialing during a call by pressing t. This is useful if you need to send touch tone signals for access to telephone banking or long-distance services.

1Dial the number.

2Press t. Buttons pressed after this send touch tone signals.

3After you hang up, the phone automatically returns to dial pulse (rotary) service.

Headset Jack

You can use this telephone hands-free when you install any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset

Plug the headset into the jack located on the right side of the handset (under the small rubber flap).

Do not force the connection, but make sure the plug

fits securely.

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Draft 3/26/02 Advanced American Telephones. All rights reserved Contents Choosing a Location for Your Phone Before YOU BeginAbout Caller Identification Caller ID Installation Before You InstallTable/Desk Installation Charge the handset battery Wall Installation Telephone Operation Temporary Tone Dialing Handset Ringer Style/Battery SaveHeadset Jack Operating Range Display Screen MessagesAT the Base MuteBase Ringer Volume Switch Intercom/PageStore a Number in Base Memory Telephone MemoryDial a Number in Base Memory Telephone Directory Store a Number/Name in the DirectoryEdit a Number/Name Stored in the Directory Edit Dial EraseDelete a Number/Name Stored in the Directory Dial a Number from the DirectoryAbout Call History Caller ID OperationReview Call History Delete a Specific Call Delete Records from Call HistoryDial a Displayed Number Delete All CallsTurn off the Base NEW Call Indicator Store a Call History Record in the DirectoryCharge the Handset Battery Pack BatteriesReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels
Top Page Image Contents