AT&T 1450 user manual Charge the handset battery

Page 7

1450_book_1ATT 3/26 3/26/02 4:59 PM Page 4

INSTALLATION

3Charge the handset battery.

Place the handset in the base. Charge the battery for at least 12 hours the first time.

4Check for dial tone.

After the batteries are charged, pick up the handset and press P; you should hear a dial tone.

5Set the dial mode.

If you have touch tone service, the phone is ready to use as soon as the batteries are charged.

If you have dial pulse (rotary) service, you’ll need to change the dial mode.

•Press G on the handset to enter programming mode.

•Press < or > until the screen displays DIAL MODE: and the currently selected mode.

•Press S. The current setting blinks.

•Press > to select TONE or PULSE.

•Press S, to save the displayed mode.

6Set the Time and Date.

•Press G, then press > until SET TIME is displayed. Press

S.

•The month is flashing. Use < and > to select the current month. Press S.

•The day is flashing. Use < and > to select the correct day. Press S.

•The hour is flashing. Use < and > to select the current hour. Press S.

•The minute is flashing. Use < and > to select the correct minute. Press S.

•AM or PM is flashing. Use < and > to choose between AM and PM. Press S.

4

Image 7

Contents Draft 3/26/02 Advanced American Telephones. All rights reserved Contents Choosing a Location for Your Phone Before YOU BeginAbout Caller Identification Caller ID Before You Install InstallationTable/Desk Installation Charge the handset battery Wall Installation Telephone Operation Temporary Tone Dialing Handset Ringer Style/Battery SaveHeadset Jack Display Screen Messages Operating RangeMute AT the BaseIntercom/Page Base Ringer Volume SwitchStore a Number in Base Memory Telephone MemoryDial a Number in Base Memory Store a Number/Name in the Directory Telephone DirectoryEdit Dial Erase Edit a Number/Name Stored in the DirectoryDial a Number from the Directory Delete a Number/Name Stored in the DirectoryAbout Call History Caller ID OperationReview Call History Delete All Calls Delete Records from Call HistoryDial a Displayed Number Delete a Specific CallStore a Call History Record in the Directory Turn off the Base NEW Call IndicatorBatteries Charge the Handset Battery PackReplacing the Handset Battery Pack Case of Difficulty If the phone does not ring when you receive a callIf the phone doesn’t work at all, check these items first If you hear other calls while using your phone If you hear noise or interference when using the phoneIf you lose a call after changing channels