Appendix
Adding new handsets
Your telephone can accommodate up to four cordless handsets. You can add new handsets
The handset provided with your E5917 is automatically registered as handset 1. Additional handsets will be assigned numbers in the order they are registered (handset 2, handset 3, or handset 4). You can register a maximum of four hand- sets.
The E5938B has two handsets automatically registered as handset 1 and 2. You can register two additional handsets, which will be assigned as number 3 and 4.
The E5939B has three handsets automatically registered as handset 1, 2 and 3. You can register one additional handset, which will be assigned as number 4.
NOT REGISTERED
PRESS HNDST LOC 4 SEC ON BASE
HS X REGISTERED
Handset 1 Handset 2 Handset 3
Handset 4 Telephone base
3.You can register only one hand- set to the base at a time.
Before using a new
To add a new handset:
•When first purchased, all optional accessory handsets show NOT REGISTERED on the screen.
•Make sure your handset battery is properly installed and charged.
•Put the handset in its cradle which is plugged into AC power. After a few seconds, PRESS HNDST LOC 4 SEC ON BASE will be shown on the screen.
•Press and hold HANDSET LOCATOR /INTERCOM on the main telephone base until the IN USE light comes on (about four seconds), then release the button.
•The handset will show PLEASE WAIT... for a while.
•The handset will show HS X REGISTERED and beep once if registration was successful.
NOTES:
1.If you are on a call, using the call log or directory, or another phone is on the same line, you cannot register a handset.
2.If the registration is not successful, the display will show NOT REGISTERED. Reset the handsets by lifting the handsets out of their cradle and then place the handsets back in the cradle.
44