AT&T E5908 user manual Remote access

1. Dial your telephone number from any touch-tone telephone.

2. When system answers, enter two digit remote access code (19 unless you have changed it).

3. Enter remote commands (see list at right).

4. Hang up to end call and save all undeleted messages.

NOTE: If you pause for more than 4 seconds during remote access, you will hear a help menu listing all features & commands. If there is no command for another 20 seconds, the call will end automatically.

Answering System Operation

Remote access

A two digit security code is required to access your answering system from any touch-tone telephone.This code is 19 by default; see page 39 to change it.

Play all messages	Press to hear all messages.
1
Play new messages	Press to hear new messages.
2
Delete the message	Press during playback to delete current
3	message. Press 3 twice to delete all old
33	messages.
Repeat or go back	Press during the caller’s message to
4	repeat the message. Press during the
	beginning of the day and time announce-
	ment to go back to the previous mes-
	sage.
Stop	Press to stop any operation (stop play-
5	back, stop recording).
Skip to next message	Press to skip current message and
6	advance to next message.
Record announcement	Press * 7, wait for beep, then begin
*7to begin recording	speaking. Press 5 to stop recording and
5to stop recording	hear playback of new announcement.
Help menu	Press to hear list of features & com-
*5	mands.
Turn system off	Press to turn off answering system.
0	Incoming calls will no longer be
	answered.
Turn system on	If off, system will answer after 10 rings.
0	Enter your access code, then press 0 to
	turn on.
Exit	Press 8 to end remote access call or
	hang up.
8

43