AT&T 1256 user manual Install the handset battery, Charge the handset battery, Check for dial tone

Page 7

3Install the handset battery.

Use only AT&T Battery 3301, SKU# 91076.

a)Remove battery compartment cover by pressing on indentation and sliding downward.

b)Plug the battery pack connector into handset. Place the battery pack and wires in the compartment.

c)Replace cover by sliding it on its track up over battery case until it snaps firmly into place.

4Charge the handset battery.

•Place the handset in the base.

•Charge the battery at least 12 hours. After the first charge, the battery will charge in eight hours.

5Check for dial tone.

•After the batteries are charged, lift the handset and press ; you should hear a dial tone.

4

Image 7

Contents Part 1 Important Product Information With Caller ID/Call WaitingPage Contents Before YOU Begin Parts ListAbout the Call Log About Caller Identification Caller IDConnect the power cord InstallationCharging Stand Installation Table/Desk InstallationCharge the handset battery Install the handset batteryCheck for dial tone Headset Belt ClipWall Installation Feature Setup Menu Telephone Feature SetupRing Volume Ring Pattern Key Click Steps Handset NameLanguage Setting Clear Message Waiting Set Dial Method Make a Call Handset VolumeTelephone Operation Idle ScreenSpeakerphone Call TimerFlash/Call Waiting RedialMute Temporary Tone Dialing Page/Handset LocatorScreen Displays When Display Screen MessagesThis Icon Indicates Display Screen IconsLight Status Indicates Base LightsTwo double beeps Tones and What They MeanThree quick beeps One double beepIntercom Calls Intercom OperationTransfer a Call Answer an Incoming Call While on an Intercom CallForward a Call Conference Calling Store a Number and Name in Phone Book PhonebookDial Page Dial a Number in Phone Book Edit a Number/Name in Phone Book Page Delete a Number/Name from Phone Book Page Caller ID Operation Review Call Log Removing a Specific Call Record Remove Call RecordsRemove All Call Records Store a Call Record in Phone Book Dialing Options Display DialSet the Clock Audible IndicatorsAnswering System Operation AT the Base Turn Answering System On or OffAbout Announcements About MailboxesTo review your announcement at any time Record Your AnnouncementAnswering System Feature Setup Change base ringer Feature SummaryChange message alert Change announce onlyListen to Messages Delete Messages Adjust Playback VolumeRecord a Memo Window Displays To Indicate Message Window DisplayVoice Menu Remote AccessRemote Access Commands Connect with the Answering SystemTurn system off End remote access callRecord announcement Record memoCharge the Handset Battery Pack Battery LifeBatteries Replace the Handset Battery Pack If you have Case of DifficultyTelephone Operation If the phone does not work at all, check these items firstIf the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf the caller’s name or phone number is not displayed Caller IDIf your telephone MisdialsIf messages are Answering SystemIncomplete Message window If appearsAnnouncement isn’t If your outgoingClear Number of Rings Default SettingsDefault Settings Announce OnlyTechnical Specifications Technical SpecificationsIndex NEW Page Page