AT&T CL2939 user manual Two-touch memory overview and storage, Two-touch memory storage

Two-touch memory

blinking

REVIEW STORE

ENTER NUMBER

8888832445_

ENTER LOCATION?

STORED

ENTER NUMBER

_

NOTE: If you enter more than 24 digits in a telephone number in step 4, the screen shows ONLY 24 ALLOWED.

Two-touch memory overview and storage

Two-touch memory overview

This telephone has 10 two-touch memory locations (speed dial locations) where you can store telephone numbers you wish to dial using fewer keys than usual.

Each two-touch memory location can store a telephone number with up to 24 digits.

Two-touch memory storage

Use the following steps to store a telephone number in a desired two-touch memory location.

1.When the telephone is idle, press MEM.

2.Press DIR/ or CID/ until STORE is blinking.

3.Press SELECT, the screen shows ENTER NUMBER.

4.Use the dial pad keys to enter the telephone number (up to 24 digits).

•To backspace and erase a digit, press DIR/.

•To insert a space between digits, press CID/. A dash appears on the screen.

•To insert a three-second dialing pause, press CID/ twice. A P appears on the screen.

•To insert a flash signal for using the service supplied by your telephone service provider, press FLASH. An F appears on the screen.

•To copy the last number dialed (up to 24 digits), press REDIAL.

5.Press SELECT. The screen shows

ENTER LOCATION?

6.Press a dial pad key (0 through 9) to choose the desired two-touch memory location for the new entry. The screen shows STORED and then

ENTER NUMBER.

7.Repeat steps 4 through 6 above to store a number in another two-touch memory location.

-OR-

Press REMOVE to return to idle mode.

23