![Serial Communication, cont’d](/images/new-backgrounds/114391/11439131x1.webp)
Serial Communication, cont’d
The Universal Switcher Control Program (part
Installing the software
The Universal Switcher Control Program is contained on the CD included with the unit.
NIf the installation program does not self start when the CD is loaded, run Launch.exe from the CD and follow the instructions that appear on the screen.
If you need to reinstall the software or new software is available, download updates to this program from the Extron Web site (http://www.extron.com).
By default, the Windows installation creates a
C:\Program Files\Extron\UnivSW folder and places a Universal Switcher icon onto the desktop.
Using the software
1. To run the software,
Figure 3-2 — MSW software icon
2. In the Comm Port Selection window (figure
Figure 3-3 — Comm port selection window
3. The Extron Universal Switcher Control Program window (figure
Figure 3-4 — The Universal Switcher program window
4. Select and click the desired input button. Symbols for the state of each LED are shown below:
indicates that the input signal is present and is selected.
indicates that the input signal is present but not selected.
indicates that the input signal is not present and not selected.
indicates that an input signal is not present, but is selected.
Click the button to refresh the input signal status.
Click the button to suppress the video image.
The Mode radio buttons indicate the current mode (Front- Panel [normal] or
MSW 4V SDI rs • Serial Communication | MSW 4V SDI rs • Serial Communication |