Extron electronic MSW 4V SDI rs AAppendix A, Specifications, Part Numbers, and Accessories

Serial Communication, cont’d

8. A status bar, showing the progress of the upload appears in the Firmware Loader window. The firmware upload to the switcher may take several minutes.

Once the status bar has progressed fully from left to right across the indicator window, the Firmware Loader utility automatically resets the switcher.

CIf the Firmware Loader utility exits before the status bar has progressed completely across the indicator window, the firmware may be corrupted and may no longer respond to the Universal Switcher Control Program. If you experience problems with this procedure, call the Extron S3 Sales & Technical Support Hotline.

When successfully completed, the installation is confirmed with a “Transfer Complete!” message, as shown below.

Figure 3-8 — The upload confirmation message

9. Click the Exit button to exit the Firmware Loader utility.

Using the help system

For information about program features, you can access the help program in two ways:

From within the Universal Switcher Control Program,

• Click on the Help entry on the task bar, or

•Press the F1 key.

MSW 4V SDI rs

AAppendix A

Specifications, Part Numbers, and Accessories

Specifications

Parts

3-10 MSW 4V SDI rs • Serial Communication