![Front Panel Controls and Indicators](/images/new-backgrounds/114391/11439123x1.webp)
Installation and Operation, cont’d
Front Panel Controls and Indicators
Figure
61
|
|
|
|
|
|
|
AUTO | MODE |
| NORMAL | AUTO |
| |
| 1 | 2 | 3 | 4 | ||
SWITCH |
| |||||
|
|
|
|
|
|
|
A/V SWITCHER |
5 4 3 2
Figure 2-7 — MSW 4V SDI rs front panel
Input selection
A | Input 1 through 4 LEDs — The Input LEDs identify the selected |
| input. |
B | Input 1 through 4 buttons — Each Input button selects the |
| associated input for output. |
The Input 1 (E), Input 2 (D), and Input 3 (C) buttons are also used to toggle autoswitch mode on and off. See "Autoswitch mode controls and indicators" below.
Autoswitch mode controls and indicators
C | Auto(switch) button — The Auto button is used with the Mode |
| button (E) to select the autoswitch mode. Auto is a secondary |
| function of the Input 3 button. |
D | Normal button — The Normal button is used with the Mode |
| button (E) to select normal mode. Normal is a secondary |
| function of the Input 2 button. |
E | Mode button — The Mode button is used with the Normal |
| button (D) or Auto button (C) to select the switching mode. |
| Mode is a secondary function of the Input 1 button. See "Mode |
| selection", on the following page. |
F | Auto Switch LED — When lit, the Auto Switch LED indicates |
| that the switcher is in autoswitch mode. In this mode, the MSW |
| automatically switches to the highest numbered input with |
| active sync pulses. When this LED is unlit, the switcher is in |
| normal (manual) mode. |
Mode selection
To turn autoswitch mode on:
1. Press and hold the Mode (Input 1) button.
2.Press and hold the Auto (Input 3) button.
3. Release the Mode and Auto buttons simultaneously.
AUTO | MODE | NORMAL | AUTO |
| |
1 | 2 | 3 | 4 | ||
SWITCH | |||||
|
|
|
| A/V SWITCHER |
Figure 2-8 — Turning on autoswitch mode
The Auto Switch LED lights, indicating that autoswitch is enabled.
To turn autoswitch mode off (Normal mode):
1. Press and hold the Mode (Input 1) button.
2.Press and hold the Normal (Input 2) button.
3. Release the Mode and Normal buttons simultaneously.
AUTO | MODE | NORMAL | AUTO |
| |
1 | 2 | 3 | 4 | ||
SWITCH | |||||
|
|
|
| A/V SWITCHER |
Figure 2-9 — Turning off autoswitch mode
The Auto Switch LED is unlit and the MSW switches to the previously selected input.
NIn the event that power is disconnected from the MSW, the unit retains mode and input settings.
MSW 4V SDI rs • Installation and Operation | MSW 4V SDI rs • Installation and Operation |