LevelOne VOI-7010, VOI-7011 user manual LAN Model, IP Type, IP, Dhcp Client, and PPPoE modes. This

Page 47

LAN Model

The default setting is NAT mode for IP

 

Phone, and this enables the embedded

 

NAT router between the LAN port and PC

 

port. You may change to Bridge Mode if

 

you need NOT use the embedded NAT

 

router. When setting to Bridge Mode, the

 

WAN and the LAN ports will be bridged.

IP Type

There are three selections for WAN: Fixed

 

IP, DHCP Client, and PPPoE modes. This

 

WAN setting is for the LAN port when set

 

in NAT mode. The WAN default is at

 

DHCP Client Mode.

 

For Fix IP Mode, please make sure the IP

 

address. Net Mask, Gateway, and DNS

 

settings are suitable in your current

 

network environment.

 

For PPPoE Mode, you have to enter

 

correct username and password to get the

 

IP address from your Internet Service

 

Provider.

41

Image 47
Contents LevelOne Page CE Declaration of conformity SafetyTable of Contents LCD Display and Keypad 103 101Introduction Features Optional Packing ContentsPage LCD Display and Keypads Hardware DescriptionVOI-7011 Front PanelVOI-7010 Memory Card Optional Headset Connection DiagramPower Installation IP Address 192.168.1.100 LAN Default SettingReset to Default Page Web Configuration System Information Phone Book Example Speed Dial Setting Example Phone Setting Phone SettingNo Answer Call ForwardAll Forward Busy ForwardPage Sntp Simple Network Time Protocol SntpVolume Page Ringer DND Do Not Disturb Auto Answer PIN Code EnabledAuto Answer CounterDial Plan Dialling Prefix Example Symbol x equals 0,1,2,3,4,5,6,7,8,9Yes Drop Prefix Replace Rule 007, 5xxx+35xx+21xx Result Dial Now *xx+#xx+11x+xxxxxxxxPage Flash Time Call Waiting Soft-key Hot line Alarm Network NetworkNetwork Status WAN Settings IP, Dhcp Client, and PPPoE modes. This LAN ModelIP Type LAN Settings Ddns Setting Example 802.1Q/TAG Vlan SettingsVlan Packets 802.1P User PriorityDMZ Virtual Server Application Diagram Pptp Password Select On to enable Pptp functionEnter login user name Enter passwordSIP Setting SIP SettingsUnderstanding the SIP Service Domain Register Name Realm 1 ~ ActiveDisplay Name User NamePage Page Codec 723 5.3K Codec PriorityRTP Packet LengthPage Codec ID Other Settings Others OthersAuto Config FXO Port MAC Clone Tones Advanced CID Save Change User PasswordUpdate UpdateUpdate Firmware Page Auto Update Settings Default Setting Reboot LCD Display and Keypad Key Descriptions Keypad DescriptionsKey Name Descriptions Call History LCD MenuPhone Book Call forward Call settingAlarm Setting Date/Time settingAuto Dial Volume and GainRinger DNS Server WAN SetupLAN Setup NetworkService Domain SIP SettingsCodec RTP SettingNAT Transversal AdministratorApplication Example Calling/Answering ConfigurationsPstn Calling ApplicationsSIP-to-SIP Calling Callings SIP-to-PSTN Calling Page PSTN-to-SIP Calling Page Attendant Transfer Way Conference CallingBlind Transfer Call Hold Application Way Conference CallCall Waiting Application Direct IP to Direct IP Calling FreeWorld Dialup FWD SIP Settings Codec Setting Specification 102 Do not hear dial tone? Can not access web page?

VOI-7011, VOI-7010 specifications

LevelOne has made a significant mark in the field of networking solutions with its innovative products, including the VOI-7010 and VOI-7011. These devices are designed to cater to the growing demands for VoIP (Voice over Internet Protocol) applications, particularly in enterprise settings where reliable and clear communication is paramount.

The LevelOne VOI-7010 and VOI-7011 are advanced VoIP gateways that convert traditional analog signals into digital voice data, allowing businesses to leverage their existing analog phones while transitioning to a VoIP infrastructure. This capability ensures that businesses can maintain their current telephone setup without incurring the high costs associated with a complete overhaul.

One of the key features of the VOI-7010 and VOI-7011 is their comprehensive support for both FXS and FXO interfaces. The FXS ports are designed for connecting analog phones, allowing them to make use of VoIP services, while the FXO ports connect to traditional telephone lines. This dual-functionality makes these devices versatile and suitable for a variety of communication needs.

In terms of technology, both the VOI-7010 and VOI-7011 support a range of high-quality audio codecs, including G.711, G.726, and G.729. This flexibility in codec support ensures that users can experience optimal voice quality and bandwidth efficiency, meeting different network conditions and requirements.

Both models also come equipped with advanced features like echo cancellation, which enhances call clarity by reducing background noise and minimizing echoes during conversations. Additionally, they support SIP (Session Initiation Protocol) for signaling and management, making them compatible with various VoIP service providers.

The VOI-7011 model further extends the capabilities of the VOI-7010 by offering enhanced security features, including firewall and NAT traversal. These features help protect the system from unauthorized access and ensure secure communication over the network.

In summary, the LevelOne VOI-7010 and VOI-7011 are robust VoIP gateways that facilitate the transition from traditional phone systems to modern VoIP solutions. With their support for multiple interfaces, high-quality codecs, and security features, they provide businesses with a reliable and efficient communication platform, paving the way for future advancements in voice communication technology.