RADIO CALLS
Using the Menu
1 Ensure radio is in IDLE STATE.
2 Short press on Cto enter menu
3 G or Huntil
UTILS
4 Short press on C to select
5 G or Huntil:
DTMF
To initiate a DTMF call in permanent live-dial.
1Enter the interconnect call from the keypad microphone, you will hear a tone sequence.
Display shows e.g. | 122 |
2Wait for call to be set up when you will hear a dial tone.
Display shows: | ENTER |
3 Enter desired phone number, taking care not to press the PTT.
6 | Short press on C |
| to show current |
ON
Note: Each DTMF digit is transmitted instantly.
Display shows
status. |
7 G or H |
entered digits:
8116
toggles on/off
8Long press on C to select
9Display shows: (for 2 seconds)
10Radio exits menu mode and display shows e.g.:
OFF
OFF
SELECTED
CHAN 05
4Once the radio has connected to the called number, you can begin the conversation. Even though this is a phone call, your conversation mimics a radio call, that means that both parties speak in turn, i.e. press the PTT to talk, release to listen.
5To end the call press the Monitor Button or change channel when the clear down call is sent automatically from your radio to shutdown the phone line.
English 34