GETTING STARTED
SELECTING A RADIO CHANNEL
Your radio offers up to 100 channels, however some may not be programmed. Check with your dealer for more information.
Your radio will power up on a preprogrammed designated channel or the channel that it was on when it was powered down.
Change Channels
Method 1
1 In the idle state use G or Hto change
channel e.g.: | CHAN 34 |
|
|
Method 2.0 (Keypad Microphone)
If the default mode for the keypad microphone is Channel entry then:
1 Enter the desired
channel number from CHAN 5 the keypad, e.g. 05:
2 Either Long press on
Cor press # CHAN 5 on the keypad (if
programmed) to select the channel.
3 | Display shows: | SELECTED |
| (for 2 seconds) | |
|
| |
|
|
|
4 | Display shows | CHAN 5 |
| channel selected | |
|
| |
|
|
|
Method 2.1 (Keypad Microphone)
If the default mode for the keypad microphone is not channel entry, then enter the channel mode.
Method 2.2
Press the channel mode direct access button, if programmed by your dealer.
Enter and select the channel number according to Method 2.0
Method 2.3 :
1 | Short press on | C To enter Menu | |
|
|
| |
2 | G or Huntil: | CHANNEL | |
|
|
| |
3 | Short press on | C To select | |
|
|
| |
4 | Display shows e.g.: | CHAN 11 | |
5Enter and select the channel number according to Method 2.0
Note: The keypad microphone cannot be used to enter the channel number during a call or whilst the radio is in a scan.
English 14