Motorola 6880906Z72-O manual Display, flashing. Figure, Nel and code are displayed, To turn off

SpiritGT+Features- Spirit GT+ Only

Scan allows you to monitor frequencies and codes of other transmitting radios. When the radio detects frequency activity, it stops scanning and locks in on the active frequency and code. It allows you to listen and talk to the person(s) transmitting without having to switch channels. Radios will scan all codes (38) on all selected channels but will only scan the two fre- quencies that were programmed onto the two channels (see radio program- ming). To scan for radios without Interference Eliminator Codes, change your code to zero (off) before pressing the Scan button.

1. With the radio on, press and release the
ActivatingScan/Lockthebutton.ScanSCANFeature:appears on the
	display, flashing. Figure 20.
2.	When the radio detects frequency activity,
	SCAN stops flashing and the active chan-
	nel and code are displayed.
3.	If you want to talk back on this channel/
	code, press Push-To-Talk button within 5
	seconds or radio will return to scanning.
4.	To turn off	feature and return to
	normal operation mode press and release
	the Scan/Lock button.		Figure 20.

PausingonaChannel:

1. Press Monitor button to lock or hold your radio to displayed channel and

	code. CHAN SCAN appears to confirm active settings.
2.	To begin scanning again, press the Monitor button.
3.	The radio will return to scan mode after 5 seconds or after you press the
&KDQQHOPush-To-Talk6FDQbutton.
4.	To turn off	feature and return to normal operation mode press

the Scan/Lock button.