Motorola 6880906Z72-O manual Hit Menu button once, Frequency will be displayed

Page 15

1Programming. Press and holdtheCode:down theContPush-To.-Talk button while turning the radio on, wait for approximately 5 seconds then release the Push-To-Talk button.

2. Hit Menu button once,	number will
flash. Figure 17.

3.Use Scroll button to select a new code for the radio.

	If using Spirit GT+, the code will be
	the same for both channels.
	the same for both channels.				Figure 17.
					Figure 17.

	To check frequency and code, turn radio on,
	the radio panel displays current settings.
	1. Press Menu button 3 times. The channel
	and frequency will be displayed.
	Press Menu button one more time, code
	FrequencyandCodeVerification:2. will be displayed.
	1. Press Menu button 3 times. The hannel
	1. Press Menu button 3 times. The hannel				Figure 18.
	and frequency will be displayed. Figure 18.				Figure 18.
	and frequency will be displayed. Figure 18.
	2. Press Scroll button to change channel.
	9VOXOZ4UZK3. Press-:Menu button one more time, ode will be displayed.

Image 15

Contents Page 1Or-88888CALL-225-5322-FCC Fax-On-Demand system atAccessories Nds Talk Range Urning Auto Reset Time-out TimerInstalling the NiMH Battery Rging the NiMH Battery Care and SafetyRadioContentsofPackage GT+ModelShown Slide battery door back half-way until you feel resistance Tioning it halfway up the radio body Flashing Green Top-off Batterybattery meter, Meterlocated on the display, is Page GT+ two channel radio Hear Click to indicate the radio is Turned off. Figure To indicate the radio is onOnce Number flashes Volume increasesUsers Are set atCode selection On Spirit GT+, press the Monitor buttonUse Scroll button to select new frequency Press Scroll button to change channel Hit Menu button onceFrequency will be displayed Frequency will be displayed. FigureTurn radio off Until Lock appears on the display To turn off Code. Chan Scan appears to confirm active settingsDisplay, flashing. Figure Nel and code are displayedIndicate Turn radio on= High sensitivity, low levels of background noise = Medium sensitivity, used in most applicationsPage Free cloth Residential IndustrialLimited Talk Range 7URXEOHVKRRWLQJFunctioning Charger is plugged into a power sourcePage Damaged Antennas Single-Unit Charger SAVE&KDUJLQJTHESE INSTRUCTIONS6DIHW\,QVWUXFWLRQVCord when disconnecting charger from AC receptacle Bly may result in a risk of electric shock or fireRisk of electric shock Interference Eliminator Code Chart Page LMN States Patents Other Patents Pending Channels Operating Frequency Talk Range Up to 4 miles Power SourceBattery Life talk time Nom RF Power Operating Temperature Storage Temperature1RWHV 1RWHV 8 0 9 0 6 Z 7 2 O