Glue Plate Method, Standard Method | Cardo Q2 specification

SCALA RIDER® Q2™ MultiSet

3. Search for Bluetooth headsets on your GPS device by following

the device’s instructions. Please consult your GPS device’s User

Manual for more information.

4. If your GPS device prompts for a PIN or Passkey enter 0000 (four zeros).

5. Your GPS device will confirm that pairing has succeeded. The

headset will begin flashing slowly in Blue.

6. If you wish to use a Bluetooth mobile phone to make and

and then tighten the screws. You may need to reposition the Clamp repeatedly until you identify the best spot. The microphone must be positioned vertically and not horizontally.

Glue Plate Method

CORRECT

INCORRECT

English

receive calls through the headset, you must now pair your

mobile phone to your GPS device by following your GPS

and/or mobile phone’s instructions.

NOTE: If the Pairing process is not completed within two minutes the headset will return to Standby mode.

ATTACHING THE CLAMP ON THE HELMET

The Helmet Clamp must be attached to the left side of the helmet. Once attached, the headset unit can be mounted or released from the Helmet Clamp at any time. There are two methods that can be used in order to attach the Clamp onto the helmet:

Standard Method: Recommended for most helmet types.

Glue Plate Method: Recommended for helmets to which the standard method cannot be applied, using the Glue Plate included in the box.

Standard Method

1. Use the enclosed Allen Wrench to loosen Allen
the two screws on the Back Plate.	Wrench
2. Slide the Back Plate between the internal	Back
padding and the external shell of the	Plate

helmet.

3. Adjust the Clamp’s location so that the

microphone is located opposite the center of your mouth,

You have the option to glue the Helmet Clamp onto your helmet, when the above standard method cannot be used, or in case you prefer to secure the Helmet Clamp with adhesive glue. This option has been successfully used for a range of high end helmets.

NOTE: While we have no reason to believe that the gluing op- tion might negatively affect any helmet, Cardo does not assume any responsibility to that affect, irrespective of its nature and circumstances. The Glue Plate is offered as a free option that you may choose to use at your own risk and subject to renouncement of any future claims.

Caution: This process can be done only once!

1.Use the enclosed Allen Wrench to remove both Allen screws and release the Helmet Clamp’s back plate.

2.Determine the location on the helmet where the Helmet Clamp must be attached.

3.Adjust the Helmet Clamp’s location on

the Helmet so that the microphone
is located opposite the center of your
mouth. You may need to reposition
the Clamp repeatedly until you identify	CORRECT	INCORRECT
the best spot. The microphone must be

positioned vertically and not horizontally (Be sure to clean the selected area prior to the gluing process as described in # 4 below).

Q2 specifications

The Cardo Q2 is an innovative communication system designed specifically for motorcyclists, enhancing the riding experience through seamless connectivity and advanced features. Manufactured by Cardo Systems, a leader in the motorcycle communication industry, the Q2 sets the standard for rider intercom technology with its robust functionality and user-friendly design.

One of the main features of the Cardo Q2 is its ability to facilitate intercom communication between riders. The system utilizes Bluetooth technology to connect with other Q2 units or compatible devices, allowing for clear and reliable communication over distances of up to 1.6 kilometers (approximately one mile). This range is particularly beneficial for group rides, ensuring that all participants can keep in touch without the need for cumbersome hand signals or stopovers.

The Q2 is equipped with advanced noise cancellation technology, significantly reducing the sound of wind and road noise, which can often interfere with communication. This feature is crucial for maintaining clear audio quality, allowing riders to communicate at high speeds and in varying weather conditions without distraction.

In terms of usability, the Cardo Q2 boasts an intuitive interface. It includes large, glove-friendly buttons that simplify operation, even with riding gloves on. The modular design of the Q2 allows for easy installation on various helmet types, making it a versatile choice for riders with different preferences.

Additionally, the Q2 supports music sharing and can connect to smartphones via Bluetooth, enabling riders to enjoy their favorite playlists or podcasts while on the road. The ability to seamlessly switch between music and intercom communication gives riders the flexibility to customize their riding experience.

The battery life of the Cardo Q2 is another standout feature. With up to 13 hours of talk time on a single charge, riders can rely on the system for long journeys without the worry of battery depletion.

Built to withstand the elements, the Q2 is water-resistant, ensuring durability in adverse weather conditions. Overall, the Cardo Q2 combines cutting-edge technology with practical design, making it an essential tool for motorcyclists seeking enhanced communication and connectivity on their adventures.