Cardo Q2 manual Using the Headset, Using the Intercom

Page 9

USING THE HEADSET

GENERAL USAGE

 

GENERAL FUNCTIONS

DESIRED RESULT:

REQUIRED ACTION:

Turn on the

Press the CTRL Button steadily for at least three

headset

seconds

Turn off the

Press the CTRL Button steadily for at least three

headset

seconds

Increase the

Short press the Volume Up Button

volume

 

Decrease the

Short press the Volume Down Button

volume

 

AGC (Automatic Gain Control): In addition to manual Volume Control, the SCALA RIDER Q2 will automatically increase and reduce its volume according to ambient noise and driving speed.

AUDIO SOURCES AND PRIORITIES

The different Audio Sources that are connected to the SCALA RIDER

Q2 are prioritized as follows:

Highest 1. Mobile phone Audio / GPS device (Incoming/outgoing calls ,     GPS audio and navigation instructions)

2.Primary Buddy Audio and Secondary Buddy Audio

3.FM Radio

Lowest 4. MP3 Connectivity

A high priority Audio Source will always interrupt any lower priority Audio Source.

i.e.

Mobile phone call interrupts Intercom call

 

Intercom call interrupts FM Radio

SCALA RIDER® Q2™ MultiSet

USING THE INTERCOM

Making Intercom calls

To start a Buddy Intercom call with the Primary Buddy while the headset is on Standby you can either:

VOICE CONNECT:

or MC BUTTON CONNECT:

Start talking

Single tap the MC Button

A Buddy Intercom call will be

A Buddy Intercom call will

established and stay on until

be established. To end the

both sides are quiet for 30

Buddy Intercom call, single

seconds.

tap the MC Button again.

To start a Buddy Intercom call with the Secondary Buddy while the headset is on Standby:

MC BUTTON CONNECT:

MC Button

Double tap the MC Button

 

 

A Buddy Intercom call will be established. To end the

Buddy Intercom call, double tap the MC Button again.

NOTE: When using a SCALA RIDER Headset (not a Q2 version) as a Passenger headset, Voice Connect Intercom can be initiated only by the SCALA RIDER Q2 headset. Manual Connect Intercom can be initiated from either headset.

Failed Connection: On the SCALA RIDER Q2, if you attempt to start a Buddy Intercom call with a Buddy that is already on a Phone/GPS/ Intercom call, you will hear a double beep indicating the Buddy is busy.

Reconnecting the Intercom: If the SCALA RIDER Q2 and its Intercom Buddy headset go out of range and disconnect from each other, the SCALA RIDER Q2 will automatically try to reconnect to its Intercom Buddy for five minutes.

English



Page 8 Page 10
Image 9
Page 8 Page 10
Contents Guide d’Utilisation Guida di Avvio Guia de Usario MultiSetScala Rider Q2 MultiSet Introduction Contents of Retail BOXBefore Using Charging the Headset SET UP and ConfigurationSET UP for BIKE-TO-BIKE Intercom Pairing Make sure that both headsets are now flashing slowly in Blue Reset Intercom PairingTo Pair the Scala Rider Q2 to a Bluetooth Mobile Phone SET UP for Mobile Phone Calls PairingSET UP for Bluetooth GPS Device Pairing To Pair the Scala Rider Q2 to a Bluetooth GPS DeviceStandard Method Glue Plate MethodPositioning the Speakers Using the Intercom Using the HeadsetEnable/Disable Voice Connect feature Making and Receiving Mobile Phone CallsReceiving Intercom calls Working with the FM Radio Status Light StatesSupport Phone USA and Canada + International +4989 450Federal Communications Commission FCC Statement FCC RF Radiation Exposure Statement Operation is subject to the following two conditionsIndustry Canada IC Statement 15.105bLimitation of Liability Disclaimer of Warranty
Related manuals
Manual 14 pages 43.33 Kb

Q2 specifications

The Cardo Q2 is an innovative communication system designed specifically for motorcyclists, enhancing the riding experience through seamless connectivity and advanced features. Manufactured by Cardo Systems, a leader in the motorcycle communication industry, the Q2 sets the standard for rider intercom technology with its robust functionality and user-friendly design.

One of the main features of the Cardo Q2 is its ability to facilitate intercom communication between riders. The system utilizes Bluetooth technology to connect with other Q2 units or compatible devices, allowing for clear and reliable communication over distances of up to 1.6 kilometers (approximately one mile). This range is particularly beneficial for group rides, ensuring that all participants can keep in touch without the need for cumbersome hand signals or stopovers.

The Q2 is equipped with advanced noise cancellation technology, significantly reducing the sound of wind and road noise, which can often interfere with communication. This feature is crucial for maintaining clear audio quality, allowing riders to communicate at high speeds and in varying weather conditions without distraction.

In terms of usability, the Cardo Q2 boasts an intuitive interface. It includes large, glove-friendly buttons that simplify operation, even with riding gloves on. The modular design of the Q2 allows for easy installation on various helmet types, making it a versatile choice for riders with different preferences.

Additionally, the Q2 supports music sharing and can connect to smartphones via Bluetooth, enabling riders to enjoy their favorite playlists or podcasts while on the road. The ability to seamlessly switch between music and intercom communication gives riders the flexibility to customize their riding experience.

The battery life of the Cardo Q2 is another standout feature. With up to 13 hours of talk time on a single charge, riders can rely on the system for long journeys without the worry of battery depletion.

Built to withstand the elements, the Q2 is water-resistant, ensuring durability in adverse weather conditions. Overall, the Cardo Q2 combines cutting-edge technology with practical design, making it an essential tool for motorcyclists seeking enhanced communication and connectivity on their adventures.
Top Page Image Contents