Altec Lansing 906, 903 manual Charging Your Headphones or Bluetooth Adaptor, Charging time

Page 6

Charging Your Headphones or Bluetooth Adaptor

1	1			Plug the AC charger into a power outlet.
1			2	Connect the charger cable to the
				headphones or Bluetooth adaptor.
				headphones or Bluetooth adaptor.

2

2

3Charge each for at least 1 hour before first time use, or 3 hours to fully charge.

The LED indicator glows red while charging. When fully charged, LED will turn blue until unplugged. Do not use your headphones or Bluetooth adaptor while they are connected to the charger.

note Never charge the battery where the temperature may fall below 0°C (32°F) or rise above 40°C (104°F)—for example, in an unattended motor vehicle.

	Charging time
	3 hours
	Full charge
[BackBeat 906 shown]	1 hour
	Minimum charge
	before first use

4

Image 6

Contents Altec Lansing BackBeat 903/906 Welcome Registering Your Product Getting AssistanceContents Package Contents and Accessories Right Earpiece-Music Controls Right EartipCharging Your Headphones or Bluetooth Adaptor Charging timeBackBeat 906 shown Pairing Your Headphones and Phone/Device If prompted, enter 0000 for the PIN code/ passkeyIndicator flashes blue and red Headphones and adaptor will bothAdjusting the Fit Headphones Phone Controls and Indicators Action Indicator Light ToneLow battery Check batteryPower IndicatorVolume call System resetAdjust the call Perform aTransfer active call Online indicatorOn/off default on Together when headset Is on To/from headsetHeadphones Music Controls and Indicators Action Indicator Light Range Audio quality is poor Locate the headphonesMy mobile phone did not Cannot hear stereo musicTroubleshooting My earbuds need to be cleanedCallers cannot hear me Adaptor is powered on Troubleshooting with Bluetooth Adaptor BackBeat 906 onlyCannot tell if my Bluetooth Cannot complete pairing withCannot make a Voip call using the adaptor Product Specifications