Altec Lansing 906, 903 manual Indicator flashes blue and red, Headphones and adaptor will both

Page 8

Pairing Your Headphones and Bluetooth Adaptor [BackBeat 906 only]

1With the headphones powered off, press and hold the Power/Pairing button until the LED Indicator flashes blue and red.

2With the adaptor powered off, press and

	hold the Power/Pairing button until the LED
	Indicator flashes blue and red.
1	3 The headphones and adaptor will both
	rapidly flash blue when paired successfully.

Both are now ready for use.

Image 8

Contents Altec Lansing BackBeat 903/906 Welcome Registering Your Product Getting AssistanceContents Package Contents and Accessories Right Earpiece-Music Controls Right EartipBackBeat 906 shown Charging Your Headphones or Bluetooth AdaptorCharging time Pairing Your Headphones and Phone/Device If prompted, enter 0000 for the PIN code/ passkeyIndicator flashes blue and red Headphones and adaptor will bothAdjusting the Fit Headphones Phone Controls and Indicators Action Indicator Light ToneCheck battery PowerLow battery IndicatorSystem reset Adjust the callVolume call Perform aOnline indicator On/off default on Together when headset Is onTransfer active call To/from headsetHeadphones Music Controls and Indicators Action Indicator Light Range Locate the headphones My mobile phone did notAudio quality is poor Cannot hear stereo musicCallers cannot hear me TroubleshootingMy earbuds need to be cleaned Troubleshooting with Bluetooth Adaptor BackBeat 906 only Cannot tell if my BluetoothAdaptor is powered on Cannot complete pairing withCannot make a Voip call using the adaptor Product Specifications

Indicator flashes blue and red.