Universal BluetoothTM Hands-Free System (ULF)
11.Enter the password (= ULF passkey) located on ULF Control Module that is in the rear of the vehicle or on the Passkey Reference Card.
∙Mobile phone display shows ‘BMW …… Pairing’
∙Mobile phone display shows ‘Pairing Successful’
∙Display screen shows ‘Pairing succeeded’ for 3 seconds
12.Enter device name or accept the name that is automatically displayed.
13.Mobile phone display shows “Added to paired devices”.
14.Exit menu by pressing the red phone/NO button.
15.Once the phone is successfully paired to the device cycle the ignition switch off and back on.
16.The devices should wirelessly connect within 30 seconds. The connection is established when the phone displays the symbols indicated, on the right side of the screen.
Note : Shortly after turning on the ignition and the BluetoothTM connection is identified, the phone may display a message asking if the connection should be established/accepted. The connection authorization request will always occur unless the setting on the phone is modified to allow automatic connection every time, please refer to the user’s manual of the phone to determine how to change this setting.
11