Receiving/Accepting a Call

Universal BluetoothTM Hands-Free System (ULF)

2.Depressing the R/T button on the steering wheel, then scrolling (using the é or ê buttons) through the address book of the phone that is linked to the ULF, until the desired number is displayed on the radio or display screen

and then depressing the send/receive button on the steering wheel or center console to place the call.

3.Depressing the button on the steering wheel until an audible “beep” is heard through the vehicle speakers, at this point a call can be placed by using the following voice commands:

∙“Dial number” or “Dial phone”

∙After the system asks for a number say the number Example: “123 456 7890”; the system will repeat the number requested once you stop speaking momentarily, the number may also be displayed depending on the vehicle and equipment/accessories installed.

∙“Dial”

∙Note: Once the dial command is given the number will be displayed on the display screen or radio; plus it will always be displayed on the mobile phone after a call is placed.

4.Briefly depressing the button on the steering wheel will redial the last number dialed.

For more information on using voice commands refer to the “Owner’s Manual for Voice Input System. The Convenient Alternative to Manual Control” (P/N 84 11 027 942)

The call ringer in the BluetoothTM mobile phone is audible when an incoming call signal is received. At the same time, the signal is sent via the BluetoothTM interface in the mobile phone to the BluetoothTM antenna in the vehicle. The ULF receives the incoming ring/call signal via the BluetoothTM antenna and mutes the radio. The incoming ring/tone signal is then also transmitted to the vehicle speakers.

The following options are available for accepting a call:

3 Series without Display Screen:

∙Press send/receive button on MFL (Steering Wheel)

∙Press send/receive button in the center console

∙Press send/receive key on mobile phone

5 Series and X5 SAV without Display Screen:

∙Press send/receive button on MFL (Steering Wheel)

∙Press send/receive key on radio

∙Press send/receive button on the oddment tray (Center Console)

∙Press send/receive key on mobile phone

Vehicles with Display Screen: