Silvercrest SBTF 10 A1 operating instructions Installing the hands-free appliance in a vehicle

Page 10

Installing the hands-free appliance in a vehicle

So that the hands-free appliance can function correctly, it is con-nected to the vehicle cigar lighter socket and provided with electricity from there.

Ensure that the hands-free appliance engages completely and that the operation of the vehicle is not negatively influenced. The LED status indicator 6 blinks every 3 seconds and a short high signal tone sounds once.

The appliance is in standby mode.

Note:

It is possible that the cigar lighter only functions when the vehicle ignition is switched on. In cases of doubt, consult the operating instructions for the particular vehicle.

Caution:

For vehicles in which the cigar lighter, resp. the vehicle circuit plug, also functions when the ignition is switched off:

Use the hands-free appliance only when the motor is running. Otherwise, the vehicle batteries could become discharged over an extended period of time.

Note:

When you are not using the hands-free equipment remove it from the vehicles cigarette lighter socket. Store it in a dry, dust free location protected from direct sunlight.

8

Image 10
Contents Bluetooth Hands-Free Kit Sbtf 10 A1 Page Content Page Bluetooth HANDS-FREE KIT General safety instructions Correct Usage Bluetooth Hands-Free Kit Operating instructions Operational voltage Volt DC / 500 mA Bluetooth Specification HSP and HFPInstalling the hands-free appliance in a vehicle Switching on The appliance is switched off Switching off The appliance is in standby modeYou can now use the hands-free appliance Separating the connection Using the hands-free appliance Automatic call acceptance Troubleshooting Clean the housing surfaces with a slightly moist soft cloth Mail support.ie@kompernass.com BOCHUM, Germany Bluetooth is a registered trademark of Bluetooth SIG, Inc