Nortel Networks 2210, 2212 To initiate a Push-to-Talk call, Receive a Push-to-Talk transmission

Page 38

38 Chapter 4 Features, functions, and buttons

To initiate a Push-to-Talk call

1Press the Push-to-Talkbutton on the right side of the handset.

The “start transmit” tone sounds within two seconds. The channel is active and the display screen shows the current active channel.

2Speak into the handset’s microphone.

All WLAN Handsets 2211 that are monitoring that channel hear the transmission.

3Release the Push-to-Talkbutton.

The “end transmit” tone sounds. The handset enters the waiting state, where it monitors the channel for up to 10 seconds.

Receive a Push-to-Talk transmission

Upon receiving a Push-to-Talk transmission, the “receiving alert” tone sounds and the handset enters the receive state.

In this state, the handset receives all conversations on the selected channel. The display shows the current active channel, the caller ID of the current transmitter, and an indication that the handset is receiving a broadcast transmission.

At the end of a transmission, the handset enters the waiting state, where it monitors the channel for up to 10 seconds and displays “Waiting” on the screen. If no other transmission occurs within 10 seconds, the “end call” tone sounds and the handset becomes idle.

To respond to a Push-to-Talk call

1When you hear a transmission, press the Push-to-Talkbutton on the right side of the handset.

The “start transmit” tone sounds. Since all handsets on that channel are already in the receive state, there is no two-second delay.

2Speak into the handset’s microphone.

If no transmission occurs during the 10-second countdown period, the “end call” tone sounds and the handset becomes idle.

To change the Push-to-Talk volume

1Use the Up and Down buttons to increase or decrease volume. A separate volume is maintained in Push-to-Talk mode.

NN40050-101

Image 38
Contents Wlan IP Handset 2210/2211/2212 User Guide Copyright 2005-2006 Nortel Networks, All Rights Reserved Task list Wlan IP Handset 2210/2211/2212 User GuideTask list NN40050-101 Contents Chapter Features, functions, and buttons About this guide AudienceSymbols and text conventions Getting startedPlay PswdGetting Help from the Nortel Web site How to get HelpGetting Help over the phone from a Nortel Solutions Center Getting Help through a Nortel distributor or resellerWlan Handsets overview Wlan Handset buttons and keys Wlan Handsets overviewFollowing table describes the Wlan Handset buttons and keys Wlan Handset buttons, keys, and descriptions Sheet 1Scrolling functions Wlan Handset displayScrolling Status area Wlan Handset displayWlan Handsets overview Status indicators Information areaStates of the Wlan Handset Feature options areaWlan handset states Setting up the Wlan Handset Wlan Handsets overview States of the Wlan HandsetTo select a language To select the Keypad AutolockSelect the Language Ring Options To select the Ring CadenceTo select the Ring Tone To select the Ring Volume To select the Vibrate CadenceTo select the Ring Delay To select the Key Tones To select the Noise ModePhone Options To select the Warning Tones Enable Tones default Disable TonesEnable Warnings default Disable Warnings To select the Display ContrastConfigure push-to-talk To configure Push-to-Talk for the handsetTo adjust speaker volume using the Function menu Adjust ringer volumeAdjust speaker volume Silence the ringerTo lock the keypad To silence the ringer using the Function menuLock and unlock the keypad To unlock the keypadSecurity Wlan Handsets overview NN40050-101 Feature and function keys Wlan Handset feature and function keysSoft Key Abbreviations menu-MENU key Feature menu-LINE keyTo activate a feature Function menu-FCN keyTo use external autodial Program Feature menu itemsTo use features To use internal autodialTo erase memory buttons Make a call Basic call featuresTo make external calls using line keys Answer calls To make external calls using intercom keysTo make internal calls using intercom buttons HoldMute End callsPush-to-Talk Call periodReceive a Push-to-Talk transmission To change the Push-to-Talk volumeTo initiate a Push-to-Talk call To respond to a Push-to-Talk callTo end a Push-to-Talk call To mute a current Push-to-Talk callTo unmute a Push-to-Talk call To answer a call during a Push-to-Talk callTo make a call during a Push-to-Talk call To view the handset IP address TroubleshootingView system information To view the server IP address TroubleshootingView the current call server IP address To view the handset firmware versionTo view the terminal type View terminal typeView extension Wlan Handset messages, descriptions, and actions Display messagesTo view the extension number Battery Low message Do not Power OFF Do not turn the Wlan Handset off A few minutes None. Do not turn the Wlan Handset off Troubleshooting NN40050-101 Wlan Handset, headset, batteries, chargers, and accessories Cleaning your Wlan HandsetHeadset Battery packsWlan Handset, headset, batteries, chargers, and accessories Low battery indicators Wlan Handset 2210 and 2212 battery pack locationDesktop Charger To insert the battery packTo change the battery pack while in a call Wlan Handset 2210, and Wlan Handset 2211 Desktop Chargers Dual Charger Wlan Handset 2211 Dual ChargerTo charge a battery pack Quad ChargerTo charge the battery pack Using the Quad ChargerCleaning the Desktop, Dual or Quad Chargers Cleaning the Wlan Handset contacts AccessoriesPage Index Index
Related manuals
Manual 100 pages 36.05 Kb Manual 61 pages 1.66 Kb Manual 64 pages 14.93 Kb

2210, 2211, 2212 specifications

Nortel Networks, once a titan in the telecommunications arena, produced a variety of products that were pivotal in shaping the future of communication technologies. Among these products were the Nortel 2212 and 2211, which played a significant role in enterprise environments, particularly in the realm of voice over IP (VoIP) and unified communications.

The Nortel 2212 and 2211 are voice codecs used primarily in voice and video communications. They are built to handle multimedia transmissions over packet-switched networks, enhancing voice clarity and video quality. The 2212 codec is particularly noted for its ability to support a wide range of audio frequencies, which allows it to replicate sounds with greater fidelity. This is crucial in corporate settings where clear communication is imperative.

One of the standout features of both codecs is their ability to support multiple voice channels. The 2212 can handle up to 12 simultaneous voice calls, while the 2211 is optimized for smaller operations and can manage 11 calls effectively. This scalability is essential for businesses of varying sizes, enabling them to grow without needing substantial overhauls to their existing infrastructure.

In terms of technology, the Nortel 2212 and 2211 utilize advanced compression algorithms to minimize bandwidth usage while maintaining high audio quality. This is especially beneficial for organizations operating in areas with limited bandwidth or needing to cut costs related to data transmission. Nortel's technology optimizes the transmission over IP networks, making it suitable for VoIP, video conferencing, and even multimedia content delivery.

Additionally, both codecs are compliant with various standards, which makes them compatible with a wide array of telecommunications equipment. Their interoperability means that businesses can integrate these codecs into existing networks without significant disruptions.

Security is another prominent characteristic of the Nortel 2212 and 2211. With built-in encryption protocols, these devices ensure that voice and video communications remain secure from potential eavesdropping or unauthorized access.

In summary, the Nortel 2212 and 2211 play crucial roles in modern telecommunications, offering robust features like scalability, advanced compression, compatibility, and security. Their legacy continues to influence the development of communication technologies and practices in enterprises around the globe, even as newer systems emerge in the fast-evolving telecom landscape.