Nortel Networks 2212, 2211, 2210 manual A few minutes

Page 48

48Chapter 5 Troubleshooting

Table 5 WLAN Handset messages, descriptions, and actions

Message

Description

Action

 

 

 

No SVPServer

The WLAN Handset was unable to

Contact your system administrator.

No DNS Entry

perform DNS lookup for the SVP Server,

 

the server had no entry for the SVP

 

 

 

 

server.

 

 

 

 

No SVPServer

The WLAN Handset was unable to

Contact your system administrator.

No DNS IP

perform DNS lookup for the SVP Server,

 

no IP Address for the SVP server.

 

 

 

 

 

 

No SW Found

A required software component has not

Contact your system administrator.

 

been properly installed.

 

 

 

 

No UNISTIM DHCP

The WLAN Handset is configured wrong.

Contact your system administrator.

 

 

 

No VPN Server

The WLAN Handset is configured wrong.

Contact your system administrator.

 

 

 

Not Installed!

A required software component has not

Contact your system administrator.

 

been properly installed.

 

 

 

 

Payload Malfmd

The WLAN Handset is configured wrong.

Contact your system administrator.

 

 

 

Press End Call

The far end of a call has hung up.

Hang up the near end.

 

 

 

Restart Command

The WLAN Handset received a restart

None. The WLAN Handset will

 

command from the server.

automatically restart in a few seconds.

 

 

 

RTP Open Failed

The WLAN Handset encountered an

Power off and then power on the

 

error in connecting to the Call Server.

handset. If the problem persists, contact

 

 

your system administrator.

 

 

 

Select License

The WLAN Handset is configured wrong.

Contact your system administrator.

 

 

 

Server Busy

The WLAN Handset is attempting to

None. The WLAN Handset will

 

download from a TFTP Server that is

automatically retry the download every

 

busy downloading other devices and

few seconds.

 

refusing additional downloads.

 

 

 

 

SKT Open Failed

The WLAN Handset encountered an

If the problem persists, contact your

 

error in connecting to the Call Server.

system administrator.

 

 

 

Storing Config

The WLAN Handset is storing changes to

None. This is informational only.

 

the handset configuration.

 

 

 

 

SVP Service Rej.

The SVP Server has rejected a request

If the problem persists, contact your

 

from the WLAN Handset.

system administrator.

 

 

 

System Busy yyy.yyy.yyy.yyy

The Server has reached its call capacity.

All call paths are in use. Try the call again

 

 

in a few minutes.

 

 

 

System Locked (with Busy

System is locked

Try the call again, system has been

Tone)

 

locked for maintenance.

 

 

 

TFTP ERROR(x):yy

A failure has occurred during a software

Power off the WLAN Handset, then turn it

 

download.

on again to retry the download.

 

 

If the error persists, contact your system

 

 

administrator.

 

 

 

Too Many Errors

The WLAN Handset continues to reset

Contact your system administrator.

 

and cannot be recovered.

 

 

 

 

Unknown xx:yy:zz

A phrase is missing from a download file.

Contact your system administrator.

 

 

 

Updating …

The WLAN Handset is internally updating

None. The handset may do this briefly

 

its software images.

after a download. This is informational

 

 

only.

 

 

 

NN40050-101

Image 48
Contents Wlan IP Handset 2210/2211/2212 User Guide Copyright 2005-2006 Nortel Networks, All Rights Reserved Task list Wlan IP Handset 2210/2211/2212 User GuideTask list NN40050-101 Contents Chapter Features, functions, and buttons About this guide AudienceSymbols and text conventions Getting startedPlay PswdHow to get Help Getting Help over the phone from a Nortel Solutions CenterGetting Help from the Nortel Web site Getting Help through a Nortel distributor or resellerWlan Handsets overview Wlan Handset buttons and keys Wlan Handsets overviewFollowing table describes the Wlan Handset buttons and keys Wlan Handset buttons, keys, and descriptions Sheet 1Wlan Handset display ScrollingScrolling functions Status area Wlan Handset displayWlan Handsets overview Status indicators Information areaFeature options area Wlan handset statesStates of the Wlan Handset Setting up the Wlan Handset Wlan Handsets overview States of the Wlan HandsetTo select the Keypad Autolock Select the LanguageTo select a language Ring Options To select the Ring CadenceTo select the Ring Tone To select the Ring Volume To select the Vibrate CadenceTo select the Ring Delay To select the Noise Mode Phone OptionsTo select the Key Tones Enable Tones default Disable Tones Enable Warnings default Disable WarningsTo select the Warning Tones To select the Display ContrastConfigure push-to-talk To configure Push-to-Talk for the handsetAdjust ringer volume Adjust speaker volumeTo adjust speaker volume using the Function menu Silence the ringerTo silence the ringer using the Function menu Lock and unlock the keypadTo lock the keypad To unlock the keypadSecurity Wlan Handsets overview NN40050-101 Feature and function keys Wlan Handset feature and function keysFeature menu-LINE key To activate a featureSoft Key Abbreviations menu-MENU key Function menu-FCN keyProgram Feature menu items To use featuresTo use external autodial To use internal autodialTo erase memory buttons Basic call features To make external calls using line keysMake a call To make external calls using intercom keys To make internal calls using intercom buttonsAnswer calls HoldEnd calls Push-to-TalkMute Call periodTo change the Push-to-Talk volume To initiate a Push-to-Talk callReceive a Push-to-Talk transmission To respond to a Push-to-Talk callTo mute a current Push-to-Talk call To unmute a Push-to-Talk callTo end a Push-to-Talk call To answer a call during a Push-to-Talk callTo make a call during a Push-to-Talk call Troubleshooting View system informationTo view the handset IP address Troubleshooting View the current call server IP addressTo view the server IP address To view the handset firmware versionView terminal type View extensionTo view the terminal type Display messages To view the extension numberWlan Handset messages, descriptions, and actions Battery Low message Do not Power OFF Do not turn the Wlan Handset off A few minutes None. Do not turn the Wlan Handset off Troubleshooting NN40050-101 Wlan Handset, headset, batteries, chargers, and accessories Cleaning your Wlan HandsetBattery packs Wlan Handset, headset, batteries, chargers, and accessoriesHeadset Low battery indicators Wlan Handset 2210 and 2212 battery pack locationTo insert the battery pack To change the battery pack while in a callDesktop Charger Wlan Handset 2210, and Wlan Handset 2211 Desktop Chargers Dual Charger Wlan Handset 2211 Dual ChargerTo charge a battery pack Quad ChargerUsing the Quad Charger Cleaning the Desktop, Dual or Quad ChargersTo charge the battery pack Cleaning the Wlan Handset contacts AccessoriesPage Index Index
Related manuals
Manual 100 pages 36.05 Kb Manual 61 pages 1.66 Kb Manual 64 pages 14.93 Kb

2210, 2211, 2212 specifications

Nortel Networks, once a titan in the telecommunications arena, produced a variety of products that were pivotal in shaping the future of communication technologies. Among these products were the Nortel 2212 and 2211, which played a significant role in enterprise environments, particularly in the realm of voice over IP (VoIP) and unified communications.

The Nortel 2212 and 2211 are voice codecs used primarily in voice and video communications. They are built to handle multimedia transmissions over packet-switched networks, enhancing voice clarity and video quality. The 2212 codec is particularly noted for its ability to support a wide range of audio frequencies, which allows it to replicate sounds with greater fidelity. This is crucial in corporate settings where clear communication is imperative.

One of the standout features of both codecs is their ability to support multiple voice channels. The 2212 can handle up to 12 simultaneous voice calls, while the 2211 is optimized for smaller operations and can manage 11 calls effectively. This scalability is essential for businesses of varying sizes, enabling them to grow without needing substantial overhauls to their existing infrastructure.

In terms of technology, the Nortel 2212 and 2211 utilize advanced compression algorithms to minimize bandwidth usage while maintaining high audio quality. This is especially beneficial for organizations operating in areas with limited bandwidth or needing to cut costs related to data transmission. Nortel's technology optimizes the transmission over IP networks, making it suitable for VoIP, video conferencing, and even multimedia content delivery.

Additionally, both codecs are compliant with various standards, which makes them compatible with a wide array of telecommunications equipment. Their interoperability means that businesses can integrate these codecs into existing networks without significant disruptions.

Security is another prominent characteristic of the Nortel 2212 and 2211. With built-in encryption protocols, these devices ensure that voice and video communications remain secure from potential eavesdropping or unauthorized access.

In summary, the Nortel 2212 and 2211 play crucial roles in modern telecommunications, offering robust features like scalability, advanced compression, compatibility, and security. Their legacy continues to influence the development of communication technologies and practices in enterprises around the globe, even as newer systems emerge in the fast-evolving telecom landscape.