6Getting started
Figure 3 shows an example of the display and describes each area.
Figure 3 Display area
Call fwd
Conference
Last num
Page gen
Button label area
Intercom
Intercom
DN: 340
Information area
Nortel Networks
April 25 10:51 am
Feature options area
Feature
Button label area
The button label area shows the label and status of the six programmable memory buttons. For more information about these buttons, refer to “Program memory buttons” on page 12.
Note: Dial pad buttons N, G, H, O and Q can also be programmed as memory buttons.
Information area
The Information area shows:
•the extension number of the telephone (DN: 340)
•a line for general information (Nortel Networks)
•the date and time when the telephone is not in use, and changes to show features and call information when the telephone is in use
Feature options area
When a feature is activated, or when you are on an active call, the display command line shows you the action you must take to proceed.
For example: Pswd. This means you must enter your mailbox password.
The Feature options area shows the label for the FEATURE button and for the three display buttons. These button labels appear in capital letters directly above the Feature and display buttons, and to the right of the FEATURE label on the display. These button labels vary depending on the feature in use.
P0995216 03