Nortel Networks IP Phone 1100 manual Introduction, Expansion module overview, Wall mounting

Page 17

17

Chapter 2

Introduction

This document describes the Expansion Module for IP Phone 1100 Series (expansion module) and how to use it with the compatible IP Phone 1100 series telephones.

The following topics are covered in this chapter:

•“Expansion module overview” on page 17

•“Setup and assembly” on page 19

•“Controls and settings” on page 19

•“Shift/Outbox key” on page 19

•“Services key” on page 19

•“Display Diagnostics menu” on page 20

Expansion module overview

The expansion module is supported on the following IP Phones:

•IP Phone 1120E

•IP Phone 1140E

The expansion module is a hardware accessory that connects to an IP Phone to provide additional line and feature keys. The module is a graphical expansion module with 18 self-labeling keys.

The supported IP Phone 1100 series phones can support a maximum of three expansion modules at one time. This allows the IP Phone 1120E and IP Phone 1140E to have a maximum of 54 additional line or feature keys with three expansion modules.

Figure 1 on page 18 shows the IP Phone 1140E with one expansion module attached.

Wall mounting

You can mount the expansion module with an IP Phone using the wall mount template and mounting bracket provided with your expansion module.

Expansion Module 1100 Series User Guide

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Expansion Module for IP Phone 1100 Series User Guide Copyright Nortel Networks 2007, All rights reserved Task List Task List NN40050-118 Contents Contents NN40050-118 Regulatory and safety information EMC compliance OtherRegulatory and safety information EMC compliance AS/NZS DenAn regulatory notice for Japan Regulatory and safety information NN40050-118 Getting Help from the Nortel Web site How to get help How to get help NN40050-118 About this guide Getting startedAudience AcronymsRelated publications Symbols and conventions used in this guideWall mounting IntroductionExpansion module overview IP Phone 1140E with expansion module DisplayControls and settings Setup and assemblyServices key Shift/Outbox keyFull Contrast Display Diagnostics menuInstalling an expansion module Installing the expansion moduleInstalling a second or third expansion module Mounting the expansion module and phone on a wall Adjusting the tilt baseInstalling the expansion module NN40050-118 Initializing the expansion module Expansion module startup initializationExpansion module startup initialization NN40050-118 Making a call using a line key Using the handsetMaking a call using the speakerphone key Putting a call on holdProgramming a feature Programming indicator keysErasing a programmed indicator keys Programming external autodial
Top Page Image Contents