Nortel Networks IP Phone 1100 manual Expansion module startup initialization

Page 25

25

Chapter 4

Expansion module startup initialization

Once you have installed and powered up the expansion module on the IP Phone, the expansion module initializes.

Table 5 on page 25 describes the initialization process for the expansion module.

Table 5 Initializing the expansion module

Activity

Description

 

 

The expansion module performs a self-test

The self-test confirms the operation of the local memory, CPU, and

 

other circuitry f the expansion module. During the self-test, the

 

expansion module display lights up.

 

Note: If the expansion module display does not light up, or lights up

 

and then goes blank, check that the expansion module is correctly

 

installed and configured.

 

 

The expansion module establishes

The expansion module display flashes until it establishes

communication with the IP Phone

communication with the IP Phone.

 

Note: If the expansion module display does not start flashing, check

 

that the expansion module is correctly installed and configured.

 

Note: If the expansion module display does not stop flashing, the

 

expansion module has not established communication with the

 

IP Phone. Check that the expansion module is correctly installed and

 

configured.

 

 

The expansion module downloads key

The key labels download to the expansion module. During the

mappings and labels

download, the display is blank.

 

 

Expansion Module 1100 Series User Guide

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Expansion Module for IP Phone 1100 Series User Guide Copyright Nortel Networks 2007, All rights reserved Task List Task List NN40050-118 Contents Contents NN40050-118 Regulatory and safety information EMC compliance OtherRegulatory and safety information EMC compliance AS/NZS DenAn regulatory notice for Japan Regulatory and safety information NN40050-118 Getting Help from the Nortel Web site How to get helpHow to get help NN40050-118 About this guide Getting startedAudience AcronymsRelated publications Symbols and conventions used in this guideExpansion module overview IntroductionWall mounting IP Phone 1140E with expansion module DisplayControls and settings Setup and assemblyServices key Shift/Outbox keyFull Contrast Display Diagnostics menuInstalling an expansion module Installing the expansion moduleInstalling a second or third expansion module Mounting the expansion module and phone on a wall Adjusting the tilt baseInstalling the expansion module NN40050-118 Initializing the expansion module Expansion module startup initializationExpansion module startup initialization NN40050-118 Making a call using a line key Using the handsetMaking a call using the speakerphone key Putting a call on holdProgramming a feature Programming indicator keysErasing a programmed indicator keys Programming external autodial
Top Page Image Contents