Getting started 7
Feature options area
When a feature is activated, or when you are on an active call, the display command line shows you the action you must take to proceed.
For example: Pswd. This means you must enter your mailbox password.
The Feature options area shows the label for the FEATURE button and for the three display buttons. These button labels appear in capital letters directly above the Feature and display buttons, and to the right of the FEATURE label on the display. These button labels vary depending on the feature in use.
About your programmable buttons
Your System Administrator assigns the six programmable buttons as line, intercom or memory buttons. The label for each button appears on the display next to the button. For more information, see your System Administrator.
Telephone setup
This section describes the IP Phone 2004 display features:
•Display contrast
•Language choice
•Ring type
Note: For more information about the features available to your telephone and how to use them, refer to the Telephone Feature Card.
Display contrast level
Adjust the contrast for the telephone display.
1Press Feature *7.
2Press DOWN and UP to view the levels.
3Press OK to select a level.
Language choice
Select the Primary Language for the telephone display.
1Press Feature *501. Select the Alternate Language for the telephone display.
1Press Feature *502. Select the Alternate Language 2 for the telephone display.
1Press Feature *503. Select the Alternate Language 3 for the telephone display.
1Press Feature *504. Select the Alternate Language 4 for the telephone display.
IP Phone 2004 User Guide