Nortel Networks 2004 manual Navigation buttons, Mute, Time offset, Call log

Page 11

Features and buttons 11

Mute

While on a call, press to turn the microphone off. The button lights when the microphone is off.

Press again to turn the microphone on.

Use on handset, Handsfree or headset calls.

Time offset

When your IP Phone 2004 is located in a different time zone from your system, the display shows the system time not the local time. The Time Offset feature allows you to adjust the time that appears on the display.

Before you begin, calculate the time difference, in hours, between the server time and local time. To change the time that appears on your telephone display to local time:

1Press Feature *510.

2Press CHANGE.

3Press * to switch between adding or subtracting time.

4Using the dialpad, enter the number of hours between local time and system time.

Note: Press # to enter half hour increments.

5Press OK.

Note: It may take up to one minute for the change to appear on the display.

Navigation buttons

Use the Navigation buttons to scroll through or make changes to your call log.

1Press Feature 812.

Call log

Call Log displays use the following special characters:

1(underline) identifies a new item ¯identifies answered calls §identifies long distance calls

/identifies that the information has been shortened

IP Phone 2004 User Guide

Image 11
Contents BCM Page Introduction Getting startedShows a description of the lights and buttons IP Phone 2004 button and light descriptionsFeature Information area IP Phone 2004 displayButton label area Display contrast level Telephone setupFeature options area About your programmable buttonsRing type Make a call Basic call featuresExternal calls using line buttons External calls using intercom buttonsHandsfree Internal calls using intercom buttonsAnswer calls HoldCall log Navigation buttonsMute Time offsetInternal autodial Memory buttonsProgram memory buttons External autodialErase memory buttons FeaturesFeatures and buttons N0027284